Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
2 stage pump repair
The last few days have been wood splittin' season.The pump on the
splitter is two stage, when it hits a tuff spot it down shifts and moves half speed with double power. ON a tuff one just an hour ago we heard a loud click and instead of down shifting there was no pressure at all. Pounded that piece of wood off with a BFH and it worked normal. That is until the next piece that kicked it down - a loud click and then no pressure at all. I know nothing about these pumps. What's the likely failure here? Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Question about 2 stage AC/Heat Pump | Home Repair | |||
Single stage vs. dual stage furnace | Home Ownership | |||
Plumbing 2 stage hydraulic pump | Metalworking | |||
opinion's wanted-two stage furnace vs single stage | Home Repair |