Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 438
Default Autodark Welding Helmet Repair

On Wed, 28 Sep 2011 06:23:29 -0700, Larry Jaques
wrote:

On 28 Sep 2011 04:33:56 GMT, "DoN. Nichols"
wrote:

On 2011-09-27, GeoLane at PTD dot NET GeoLane wrote:

The Harbor Freight autodarkening welding helmet with the solar cell
actually has two coin cell batteries inside, and when they get weak,
the autodarkening ceases to function Some times this happens in a
little over a year.




The name it has in the dropbox, BTW, is:

Harbor_Freight_Autodark_Welding_Helmet_repair.pdf



I didn't see how the cells were electrically oriented from the
article. Are they 2 separate 3v circuits, in serial for 6v, or in
parallel for a higher ampacity 3v circuit?


There are two separate circuits.

If the case were easier to open / could be opened and closed easily,
just replacing the coin cells would be the easiest fix, but since the
case wasn't meant to be opened, it's best to buy AAA battery holders
and run wires through the case to the contacts.

RWL

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Autodark helmet failure - now Radio Shack comments Wes[_5_] Metalworking 4 August 6th 10 10:58 PM
autodark bifocals and autodark hood combo ... hey, ernie Larry Jaques[_2_] Metalworking 0 July 8th 10 12:16 PM
Make your own welding helmet RB[_2_] Metalworking 0 June 25th 09 03:34 PM
Make your own welding helmet HeyBub[_3_] Home Repair 0 June 25th 09 11:52 AM
FA: Autodark Lens/Filter for Welding Mask Keith Marshall Metalworking 0 February 17th 05 05:17 AM


All times are GMT +1. The time now is 03:58 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"