Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
How to set up for cutting extractor relief cuts on barrel breech?
I have a Rockwell 21-100 mill with a head that rotates side to side.
The head on it's side will run into the table before I get the barrel in the vise on the table high enough to get the spindle parallel with the barrel. I could cut perpendicular to the barrel, and then file out the uncut corners by hand. I am looking at a Ruger #1 re barrel right now. TIA |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Connect 5/16" OD 22LR steel barrel liner to larger OD barrel? | Metalworking | |||
Cutting / measuring odd angles for miter cuts | Home Repair | |||
fa: Stihl Concrete cutting saw (also cuts metal, of course) | Metalworking | |||
Relief | Home Repair | |||
Oak barrel tap | UK diy |