DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Starting the Royal Enfield Restoration (https://www.diybanter.com/metalworking/327524-re-starting-royal-enfield-restoration.html)

Jordan[_7_] August 22nd 11 08:17 AM

Starting the Royal Enfield Restoration
 
On 8/22/2011 4:26 PM, Gunner Asch wrote:
https://picasaweb.google.com/1040422...anRoyalEnfield
https://picasaweb.google.com/1040422...eldRestoration


I dont know what the original owner(s) did in the 10 yrs before I got
it and when it was imported into the US..but they apparently didnt have
a very good source of Whitworth nuts and bolts..because so far..about
1/3 of the hardware Ive removed...is SAE...regular sized nuts and bolts.


Don't worry about having 2 sets of spanners - late model Nortons had
both British and USA standard threads, and toolkit to suit. As long as
there's a nut at the end of a bolt, it usually doesn't matter what
thread standard is.
That's a Matchless (or AJS - same factory) toolbox on the left side.

Gunner Asch[_6_] August 22nd 11 12:19 PM

Starting the Royal Enfield Restoration
 
On Mon, 22 Aug 2011 17:17:39 +1000, Jordan wrote:

On 8/22/2011 4:26 PM, Gunner Asch wrote:
https://picasaweb.google.com/1040422...anRoyalEnfield
https://picasaweb.google.com/1040422...eldRestoration


I dont know what the original owner(s) did in the 10 yrs before I got
it and when it was imported into the US..but they apparently didnt have
a very good source of Whitworth nuts and bolts..because so far..about
1/3 of the hardware Ive removed...is SAE...regular sized nuts and bolts.


Don't worry about having 2 sets of spanners - late model Nortons had
both British and USA standard threads, and toolkit to suit. As long as
there's a nut at the end of a bolt, it usually doesn't matter what
thread standard is.
That's a Matchless (or AJS - same factory) toolbox on the left side.



That is the Electrical box, with what should have been the ignition
switch in the hole. When I got it..it had 2 toggle switches in it. One
for lighting..the other for the power to the coil/distributor.

Gunner

--
"The danger to America is not Barack Obama but a citizenry
capable of entrusting a man like him with the Presidency.
It will be far easier to limit and undo the follies of an
Obama presidency than to restore the necessary common sense
and good judgment to a depraved electorate willing to have
such a man for their? president.. Blaming the prince of the
fools should not blind anyone to the vast confederacy of
fools that made him their prince".


All times are GMT +1. The time now is 05:03 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter