Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
I need some thin acetal washers....
I need to make some spacers out of .01" acetal sheet. I've not worked
with it before. I had planned to drill the 1/4" center holes, and then cut the 1" OD somehow. Is this sheet flexible enough to stamp them out with a die in an arbor press, or will I have to cut each one out using a hole saw? ---- By the by, I'd prefer to use stainless steel, but cannot find the size I'd need.... 1/4" ID, 1" OD and from .01" to .03" thick, but they all need to be consistent. Also the cost of stainless might be prohibtive,,,, as I'd need 192 of them. McMaster wants $5 for a bag of 10. There is stainless shim stock of course, but I don't know if I could cut it very well with anything I have, or could make. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
I need some thin acetal washers....
DougC wrote:
I need to make some spacers out of .01" acetal sheet. I've not worked with it before. I had planned to drill the 1/4" center holes, and then cut the 1" OD somehow. Is this sheet flexible enough to stamp them out with a die in an arbor press, or will I have to cut each one out using a hole saw? Personally, I'd first look up the properties of "acetal," whatever the heck that is. A coworker here recently made a cutter for some Viton gaskets where he needed to hold about three thou - he just cut one (cutter) out of some piece of ordinary A36 steel he found in the cutoff bin, and used it in the press. But if "acetal" is rigid like styrene or acrylic or polycarbonate, then just mill it - for quantities in the thousands, you might farm it out to an NC shop. Good Luck! Rich |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
I need some thin acetal washers....
In article ,
Rich Grise wrote: DougC wrote: I need to make some spacers out of .01" acetal sheet. I've not worked with it before. I had planned to drill the 1/4" center holes, and then cut the 1" OD somehow. Is this sheet flexible enough to stamp them out with a die in an arbor press, or will I have to cut each one out using a hole saw? Personally, I'd first look up the properties of "acetal," whatever the heck that is. A coworker here recently made a cutter for some Viton gaskets where he needed to hold about three thou - he just cut one (cutter) out of some piece of ordinary A36 steel he found in the cutoff bin, and used it in the press. But if "acetal" is rigid like styrene or acrylic or polycarbonate, then just mill it - for quantities in the thousands, you might farm it out to an NC shop. Good Luck! Rich Again I say try Bokers CP |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
I need some thin acetal washers....
On 8/7/2011 3:10 PM, Pilgrim wrote:
In , Rich wrote: DougC wrote: I need to make some spacers out of .01" acetal sheet. I've not worked with it before. ... Personally, I'd first look up the properties of "acetal," whatever the heck that is. Acetal is Delrin, basically. Which is pretty rigid in thicker pieces, but thin film I dunno. My question is if it would crack/split when cut with a die in a press or not. Again I say try Bokers CP They look great--except that they appear to be a manufacturer and not a retailer, and I only need about 200 of the things. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
I need some thin acetal washers....
DougC wrote:
On 8/7/2011 3:10 PM, Pilgrim wrote: In , Rich wrote: DougC wrote: I need to make some spacers out of .01" acetal sheet. I've not worked with it before. ... Personally, I'd first look up the properties of "acetal," whatever the heck that is. Acetal is Delrin, basically. Which is pretty rigid in thicker pieces, but thin film I dunno. My question is if it would crack/split when cut with a die in a press or not. Again I say try Bokers CP They look great--except that they appear to be a manufacturer and not a retailer, and I only need about 200 of the things. You still might want to talk to them. That's what they do, make weird washers other places don't stock. |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
I need some thin acetal washers....
DougC wrote:
On 8/7/2011 3:10 PM, Pilgrim wrote: Rich wrote: DougC wrote: I need to make some spacers out of .01" acetal sheet. I've not worked with it before. ... Personally, I'd first look up the properties of "acetal," whatever the heck that is. Acetal is Delrin, basically. Which is pretty rigid in thicker pieces, but thin film I dunno. My question is if it would crack/split when cut with a die in a press or not. Delrin machines like a dream, but I'd definitely rather machine it than try to cut it with a die in a press. It wouldn't necessarily crack/split, but the die wouldn't last for more than a few hundred, if it actually cuts and doesn't just gorilla its way through the material. Why not just try it, record the results, and report back? Some people call that "science." :-) Have Fun! Rich |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
I need some thin acetal washers....
Wonder if you could turn down a cylinder and then bore out the center -
then use a HSS cutoff tool to slice off washers. Hum. Martin On 8/7/2011 7:18 PM, Rich Grise wrote: DougC wrote: On 8/7/2011 3:10 PM, Pilgrim wrote: Rich wrote: DougC wrote: I need to make some spacers out of .01" acetal sheet. I've not worked with it before. ... Personally, I'd first look up the properties of "acetal," whatever the heck that is. Acetal is Delrin, basically. Which is pretty rigid in thicker pieces, but thin film I dunno. My question is if it would crack/split when cut with a die in a press or not. Delrin machines like a dream, but I'd definitely rather machine it than try to cut it with a die in a press. It wouldn't necessarily crack/split, but the die wouldn't last for more than a few hundred, if it actually cuts and doesn't just gorilla its way through the material. Why not just try it, record the results, and report back? Some people call that "science." :-) Have Fun! Rich |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Does globe shut off mean ball valve. Does Qest Acetal mean plastic? | Home Repair | |||
Feed Rate Machning Acetal homopolymer (Delrin) | Metalworking | |||
Ultra thin screwdriver - update on Brownells Thin-Bit set | Metalworking | |||
delrin/acetal remelting | Metalworking | |||
Source for GOOD bolts, washers, copper washers, etc? | Metalworking |