Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Press in captive studs
I have a part being machined that calls for 2 captive studs to be
inserted and thought I'd try to put the studs in myself. They're stainless, 8/32 about an inch long and require a .163 pocket (partially drilled hole). I thought that maybe I could build some sort of jig to keep them straight and then tap them with a hammer? OR-- Is there a small accessory or something that maybe I could use with an arbor or vise? Any ideas? Need to do them myself to save some time and money. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Making captive screws with just "woodworking' tools | Metalworking | |||
video for British captive in Palestine ((new)) | Home Repair | |||
video for British captive in Palestine ((new)) | UK diy | |||
Captive Basin Waste..Opinions | UK diy | |||
Captive Plug Inside Shower Drain | Home Repair |