Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 218
Default How to move a barn!

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE



  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,910
Default How to move a barn!

Phil Kangas wrote:
How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE


That's more impressive that weird trucks and hydraulic jacks.
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,473
Default How to move a barn!

Phil Kangas wrote:
How would you move a large barn?

....

If you were going to do that and needed to know how many people you
would need to lift it, how would you determine its weight?

You could measure its pieces & add it up. E.g., so many square feet of
roofing shingles, of siding, of sheathing, linear feet of studs, of
each different size beam, etc, etc.

But that's not clever enough by far. Let's see: you could put, say, 10
sheets of plywood under it, spaced around it, and air bags under the
plywood. Then 17000/(10 * 32 sq ft * 144 sq in/sq ft) = .37 psi.
Measure the psi in each bag & add it up. But that's a lot of air bags
(expensive). And each sheet of plywood would have to support 1700 lbs,
which probably means a need for stiffening structure.

You could use 1 sheet of plywood & 1 air bag and move them around, but
how would you know when the air pressure is enough, but not too much?

Load cells? Expensive.

What else? A really long, really stiff lever, and a pivot to put it on.

????

Bob

  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 247
Default How to move a barn!

On Sat, 05 Mar 2011 17:35:32 -0500, Bob Engelhardt wrote:


What else? A really long, really stiff lever, and a pivot to put it on.


Two pivots and 'walk' it the distance between the two pivots each revolution.
http://www.youtube.com/watch?v=-K7q20VzwVs
Skip to the two minute mark to see the poll barn being moved.
--
William
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,138
Default How to move a barn!

On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"
wrote:

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE


That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".



  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,507
Default How to move a barn!

Don Foreman wrote:
On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE


That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".


If a man can build a garage in 60 days, can 60 men build a garage in a
day? ;-)

Cheers!
Rich

  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 6,746
Default How to move a barn!


Rich Grise wrote:

Don Foreman wrote:
On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE


That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".


If a man can build a garage in 60 days, can 60 men build a garage in a
day? ;-)


If it takes one man 60 days to build a garage, he needs some remedial
construction classes. Building an average two car free standing garage
solo should not take more than a week of full days of work.
  #8   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,507
Default How to move a barn!

Pete C. wrote:
Rich Grise wrote:
Don Foreman wrote:
On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE

That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".


If a man can build a garage in 60 days, can 60 men build a garage in a
day? ;-)


If it takes one man 60 days to build a garage, he needs some remedial
construction classes. Building an average two car free standing garage
solo should not take more than a week of full days of work.


Okay, seven then. Can seven men throw one up in a day?

Hmm. They probably could. ;-)

Maybe this is a bad example anyway - it comes from the phenomenon of
throwing programmers at a problem to try to get it solved quicker -
"You can't get a baby in a month by impregnating nine women!"

Cheers!
Rich

  #9   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,632
Default How to move a barn!

Rich Grise fired this volley in news:il10k1
:

Okay, seven then. Can seven men throw one up in a day?

Hmm. They probably could. ;-)


Not to beat a silly horse, but the Amish can put up a barn of arbitrary
size in a day. It has to do more with available hands and organization
of labor than with the specific workload.

And, for what it's worth, they call it "a frolic".

G

LLoyd
  #10   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 6,746
Default How to move a barn!


Rich Grise wrote:

Pete C. wrote:
Rich Grise wrote:
Don Foreman wrote:
On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE

That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".

If a man can build a garage in 60 days, can 60 men build a garage in a
day? ;-)


If it takes one man 60 days to build a garage, he needs some remedial
construction classes. Building an average two car free standing garage
solo should not take more than a week of full days of work.


Okay, seven then. Can seven men throw one up in a day?

Hmm. They probably could. ;-)

Maybe this is a bad example anyway - it comes from the phenomenon of
throwing programmers at a problem to try to get it solved quicker -



"You can't get a baby in a month by impregnating nine women!"


Well, you do increase your odds of getting a baby under construction by
a factor of 9X...


  #11   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,789
Default How to move a barn!

Rich Grise wrote:
Pete C. wrote:
Rich Grise wrote:
Don Foreman wrote:
On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE

That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".

If a man can build a garage in 60 days, can 60 men build a garage in a
day? ;-)


If it takes one man 60 days to build a garage, he needs some remedial
construction classes. Building an average two car free standing garage
solo should not take more than a week of full days of work.


Okay, seven then. Can seven men throw one up in a day?

Hmm. They probably could. ;-)

Maybe this is a bad example anyway - it comes from the phenomenon of
throwing programmers at a problem to try to get it solved quicker -
"You can't get a baby in a month by impregnating nine women!"

Cheers!
Rich

I know someone who wanted a cardigan quickly, he farmed out various
bits of knitting out to various females and got one to put it all
together.(it worked sort of).

  #12   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,138
Default How to move a barn!

On Sun, 06 Mar 2011 14:06:42 -0800, Rich Grise
wrote:

Pete C. wrote:
Rich Grise wrote:
Don Foreman wrote:
On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE

That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".

If a man can build a garage in 60 days, can 60 men build a garage in a
day? ;-)


If it takes one man 60 days to build a garage, he needs some remedial
construction classes. Building an average two car free standing garage
solo should not take more than a week of full days of work.


Okay, seven then. Can seven men throw one up in a day?


If 24 guys poured the slab, would it reach full cure strength in a
day?
  #13   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 270
Default How to move a barn!

Rich Grise wrote:
Don Foreman wrote:
On Sat, 5 Mar 2011 12:38:30 -0500, "Phil Kangas"

How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE

That is downright inspiring!

17,000 lb, 334 lifters = less than 50 lb per lifter on average. Gives
real meaning to the old saw "many hands make light work".


If a man can build a garage in 60 days, can 60 men build a garage in a
day? ;-)

Cheers!
Rich

And put 9 women at it and have a baby in one month.

Lets see that guy do it with a "PA bank barn". :-)
...lew...
  #14   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 10,530
Default How to move a barn!

Yes, if they work together. OTOH, if they are
union..... well, maybe not.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Rich Grise" wrote in message
...

If a man can build a garage in 60 days, can 60 men
build a garage in a day? ;-)

Cheers!
Rich


  #15   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,055
Default How to move a barn!


"Phil Kangas" wrote in message
...
How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE


All I get is a black screen with a small pattern in the center like it's
loading. Tried it umpteen times.

SteveB

Heart surgery pending?
Read up and prepare.
Download the book $10
http://cabgbypasssurgery.com




  #16   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 10,530
Default How to move a barn!

Sorry your machine doesn't want to play that video. Worked,
here.


--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"Steve B" wrote in message
...

"Phil Kangas" wrote in message
...
How would you move a large barn?
Check out these guys!

http://www.youtube.com/watch?v=o83W0gj_CRE


All I get is a black screen with a small pattern in the
center like it's
loading. Tried it umpteen times.

SteveB

Heart surgery pending?
Read up and prepare.
Download the book $10
http://cabgbypasssurgery.com



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BIG BARN lance Home Repair 2 October 19th 07 02:18 AM
BIG BARN lance Home Repair 4 October 19th 07 02:18 AM
Barn Lumber WConner Woodworking 14 August 18th 06 04:56 PM
BUG BARN J T Woodworking 0 November 13th 05 01:42 AM
Dismantlingrecycling old barn srazor Woodworking 0 August 17th 04 07:50 PM


All times are GMT +1. The time now is 08:17 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"