Cling Wrap
 

Sometimes you have to put in a screw in a place that you just can't get your
hand in there and if you drop the screw you are totally hosed. I was
repairing a broken wire in my boat yesterday and ran into one of those. Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. I considered making one, but thought maybe somebody else
would have a better solution. I did a search for DIY screw holding
screwdriver or something like that and found a good tip that worked
perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Cling Wrap
 

On Feb 11, 1:37*pm, "Bob La Londe" wrote:
Sometimes you have to put in a screw in a place that you just can't get your
hand in there and if you drop the screw you are totally hosed. *I was
repairing a broken wire in my boat yesterday and ran into one of those. *Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. *I considered making one, but thought maybe somebody else
would have a better solution. *I did a search for DIY screw holding
screwdriver or something like that and found a good tip that worked
perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish *had thought of it.

Holy crap, that's great!

Dave

Cling Wrap
 

In article , "Bob La Londe" wrote:
Sometimes you have to put in a screw in a place that you just can't get your
hand in there and if you drop the screw you are totally hosed. I was
repairing a broken wire in my boat yesterday and ran into one of those. Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. I considered making one, but thought maybe somebody else
would have a better solution. I did a search for DIY screw holding
screwdriver or something like that and found a good tip that worked
perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Bob, that's definitely a keeper. THANK YOU for posting the tip. I can think of
half a dozen situations, just in the last six months, where I could have used
that.

Cling Wrap
 

"Bob La Londe" wrote in message
...
Sometimes you have to put in a screw in a place that you just can't get your
hand in there and if you drop the screw you are totally hosed. I was
repairing a broken wire in my boat yesterday and ran into one of those. Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. I considered making one, but thought maybe somebody else
would have a better solution. I did a search for DIY screw holding
screwdriver or something like that and found a good tip that worked
perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Very nice! Great tip.
Waaay back when I was a TV repair tech in mid last century we used
to dig a small piece of the waxy stuff off the flyback xformer and used it
to stick the screw to the driver. It worked great but I haven't seen that
waxy stuff in decades.
Art

Cling Wrap
 

On Feb 11, 1:37*pm, "Bob La Londe" wrote:

Excellent. Thanks.

Cling Wrap
 

Bob La Londe wrote:
Sometimes you have to put in a screw in a place that you just can't
get your hand in there and if you drop the screw you are totally
hosed. I was repairing a broken wire in my boat yesterday and ran
into one of those. Of course it's a stainless steel screw so a mag
tip wouldn't work.
I couldn't find any of the screw holder screwdrivers I used to have,
and it was late enough I wasn't confident in finding one at any
stores that would still be open. I considered making one, but
thought maybe somebody else would have a better solution. I did a
search for DIY screw holding screwdriver or something like that and
found a good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly
against the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Great idea Bob, that's gonna come in very handy.

Jon

Cling Wrap
 

Thank you! Not only is that about as simple and elegant as it gets, it
could be applied to probably any fastener, including hex head bolts with
sockets. Going to add a roll to the aluminum foil I keep in the shop.

Jon

Cling Wrap
 

On Fri, 11 Feb 2011 19:28:57 GMT, (Doug Miller)
wrote:

In article , "Bob La Londe" wrote:
Sometimes you have to put in a screw in a place that you just can't get your
hand in there and if you drop the screw you are totally hosed. I was
repairing a broken wire in my boat yesterday and ran into one of those. Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. I considered making one, but thought maybe somebody else
would have a better solution. I did a search for DIY screw holding
screwdriver or something like that and found a good tip that worked
perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Bob, that's definitely a keeper. THANK YOU for posting the tip. I can think of
half a dozen situations, just in the last six months, where I could have used
that.

Hey Bob,

Good one !!

I don't usually have any Saran Wrap or other handy cling-paper at the
job-site or in the shop, but I always have black electricians tape.
Works exactly the same method you describe, and on a box-end wrench to
hold a nut.

Take care.

Brian Lawson,
Bothwell, Ontario.

ps....wuzzat about a boat????

Cling Wrap
 

On Feb 11, 4:24*pm, Brian Lawson wrote:
On Fri, 11 Feb 2011 19:28:57 GMT, (Doug Miller)
wrote:





In article , "Bob La Londe" wrote:
Sometimes you have to put in a screw in a place that you just can't get your
hand in there and if you drop the screw you are totally hosed. *I was
repairing a broken wire in my boat yesterday and ran into one of those. *Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. *I considered making one, but thought maybe somebody else
would have a better solution. *I did a search for DIY screw holding
screwdriver or something like that and found a good tip that worked
perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish *had thought of it.

Bob, that's definitely a keeper. THANK YOU for posting the tip. I can think of
half a dozen situations, just in the last six months, where I could have used
that.

Hey Bob,

Good one !!

I don't usually have any Saran Wrap or other handy cling-paper at the
job-site or in the shop, but I always have black electricians tape.
Works exactly the same method you describe, and on a box-end wrench to
hold a nut.

Take care.

Brian Lawson,
Bothwell, Ontario.

ps....wuzzat about a boat????- Hide quoted text -

- Show quoted text -

Masking tape, freezer tape and regular scotch tape all work. Some are
easier than others to remove after the screw is started. Just depends
on what you have on hand. And you can wrap a nut in newspaper and use
that to hold it in a socket while running it on a stud or bolt in a
hole. That's if you don't have any proper-sized rare-earth magnets to
do the same.

Stan

Cling Wrap
 

Bob La Londe wrote:
Sometimes you have to put in a screw in a place that you just can't get
your hand in there and if you drop the screw you are totally hosed. I
was repairing a broken wire in my boat yesterday and ran into one of
those. Of course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and
it was late enough I wasn't confident in finding one at any stores that
would still be open. I considered making one, but thought maybe
somebody else would have a better solution. I did a search for DIY
screw holding screwdriver or something like that and found a good tip
that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly
against the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.





NOW you tell me! :)

--

Richard Lamb
email me:
web site: http://www.home.earthlink.net/~cavelamb

Cling Wrap
 

Artemus wrote:
Waaay back when I was a TV repair tech in mid last century we used
to dig a small piece of the waxy stuff off the flyback xformer and used it
to stick the screw to the driver. It worked great but I haven't seen that
waxy stuff in decades.
Art
What about the "dipey" stuff used to protect a re-sharpened
mill cutter? might it work?
...lew...

Cling Wrap
 

"Bob La Londe" wrote in message
...
Sometimes you have to put in a screw in a place that you just can't get your hand in
there and if you drop the screw you are totally hosed. I was repairing a broken
wire in my boat yesterday and ran into one of those. Of course it's a stainless
steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it was late
enough I wasn't confident in finding one at any stores that would still be open. I
considered making one, but thought maybe somebody else would have a better solution.
I did a search for DIY screw holding screwdriver or something like that and found a
good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against the
tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.




Much better and more sanitary than the boogers I've been using for decades.

Cling Wrap
 

On Fri, 11 Feb 2011 23:01:44 -0500, "Tom Gardner" hd@hd wrote:


"Bob La Londe" wrote in message
...
Sometimes you have to put in a screw in a place that you just can't get your hand in
there and if you drop the screw you are totally hosed. I was repairing a broken
wire in my boat yesterday and ran into one of those. Of course it's a stainless
steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it was late
enough I wasn't confident in finding one at any stores that would still be open. I
considered making one, but thought maybe somebody else would have a better solution.
I did a search for DIY screw holding screwdriver or something like that and found a
good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against the
tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.




Much better and more sanitary than the boogers I've been using for decades.

Damn, I was afraid to volunteer my solution.

karl

Cling Wrap
 

On 2011-02-12, Lewis Hartswick wrote:
Artemus wrote:
Waaay back when I was a TV repair tech in mid last century we used
to dig a small piece of the waxy stuff off the flyback xformer and used it
to stick the screw to the driver. It worked great but I haven't seen that
waxy stuff in decades.
Art
What about the "dipey" stuff used to protect a re-sharpened
mill cutter? might it work?

Or -- just do what I do -- save the wax from Gouda cheese, and
when you get enough, melt it and pour into some disposable container for
future use -- for tool dipping and whatever.

Enjoy,
DoN.

--
Remove oil spill source from e-mail
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

Cling Wrap
 

Tom Gardner wrote:

"Bob La Londe" wrote in message
...
Sometimes you have to put in a screw in a place that you just can't get your hand in
there and if you drop the screw you are totally hosed. I was repairing a broken
wire in my boat yesterday and ran into one of those. Of course it's a stainless
steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it was late
enough I wasn't confident in finding one at any stores that would still be open. I
considered making one, but thought maybe somebody else would have a better solution.
I did a search for DIY screw holding screwdriver or something like that and found a
good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against the
tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.




Much better and more sanitary than the boogers I've been using for decades.


Well, you've never had to worry about running out have you? ;-)


--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.

Cling Wrap
 

DoN. Nichols wrote:
On 2011-02-12, Lewis wrote:
Artemus wrote:
Waaay back when I was a TV repair tech in mid last century we used
to dig a small piece of the waxy stuff off the flyback xformer and used it
to stick the screw to the driver. It worked great but I haven't seen that
waxy stuff in decades.
Art
What about the "dipey" stuff used to protect a re-sharpened
mill cutter? might it work?

Or -- just do what I do -- save the wax from Gouda cheese, and
when you get enough, melt it and pour into some disposable container for
future use -- for tool dipping and whatever.

Enjoy,
DoN.



Drill a hole in the back end of the screwdriver and fill it with the
wax. Not my idea but I remember it from an old Popular
Science/Mechanics magazine many years ago.

John

Cling Wrap
 

"Michael A. Terrell" wrote in message
...

Tom Gardner wrote:

"Bob La Londe" wrote in message
...
Sometimes you have to put in a screw in a place that you just can't get your hand
in
there and if you drop the screw you are totally hosed. I was repairing a broken
wire in my boat yesterday and ran into one of those. Of course it's a stainless
steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it was
late
enough I wasn't confident in finding one at any stores that would still be open.
I
considered making one, but thought maybe somebody else would have a better
solution.
I did a search for DIY screw holding screwdriver or something like that and found
a
good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against the
tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.




Much better and more sanitary than the boogers I've been using for decades.


Well, you've never had to worry about running out have you? ;-)


Can you fart at will? (maybe you're the wrong guy to ask)

Cling Wrap
 

On 13 Feb 2011 02:56:49 GMT, "DoN. Nichols"
wrote:

On 2011-02-12, Lewis Hartswick wrote:
Artemus wrote:
Waaay back when I was a TV repair tech in mid last century we used
to dig a small piece of the waxy stuff off the flyback xformer and used it
to stick the screw to the driver. It worked great but I haven't seen that
waxy stuff in decades.
Art
What about the "dipey" stuff used to protect a re-sharpened
mill cutter? might it work?

Or -- just do what I do -- save the wax from Gouda cheese, and
when you get enough, melt it and pour into some disposable container for
future use -- for tool dipping and whatever.

Enjoy,
DoN.
I wondered why I saved that.
Gerry :-)}
London, Canada

Cling Wrap
 

Tom Gardner wrote:

"Michael A. Terrell" wrote in message
...

Tom Gardner wrote:

"Bob La Londe" wrote in message
...
Sometimes you have to put in a screw in a place that you just can't get your hand
in
there and if you drop the screw you are totally hosed. I was repairing a broken
wire in my boat yesterday and ran into one of those. Of course it's a stainless
steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it was
late
enough I wasn't confident in finding one at any stores that would still be open.
I
considered making one, but thought maybe somebody else would have a better
solution.
I did a search for DIY screw holding screwdriver or something like that and found
a
good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against the
tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.




Much better and more sanitary than the boogers I've been using for decades.


Well, you've never had to worry about running out have you? ;-)


Can you fart at will? (maybe you're the wrong guy to ask)


With the medication I'm on? NO.


--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.

Cling Wrap
 

"Michael A. Terrell" wrote in message
...

Tom Gardner wrote:

"Michael A. Terrell" wrote in message
...

Tom Gardner wrote:

"Bob La Londe" wrote in message
...
Sometimes you have to put in a screw in a place that you just can't get your
hand
in
there and if you drop the screw you are totally hosed. I was repairing a
broken
wire in my boat yesterday and ran into one of those. Of course it's a
stainless
steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was
late
enough I wasn't confident in finding one at any stores that would still be
open.
I
considered making one, but thought maybe somebody else would have a better
solution.
I did a search for DIY screw holding screwdriver or something like that and
found
a
good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the
tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.




Much better and more sanitary than the boogers I've been using for decades.


Well, you've never had to worry about running out have you? ;-)


Can you fart at will? (maybe you're the wrong guy to ask)


With the medication I'm on? NO.


--

Unless of course you're in Church!

Cling Wrap
 

Tom Gardner wrote:

Michael A. Terrell wrote:

Tom Gardner wrote:

Michael A. Terrell wrote:

Tom Gardner wrote:

Bob La Londewrote:

Sometimes you have to put in a screw in a place that you just can't get your
hand in there and if you drop the screw you are totally hosed. I was
repairing a broken wire in my boat yesterday and ran into one of those. Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. I considered making one, but thought maybe somebody else
would have a better solution.
I did a search for DIY screw holding screwdriver or something like that and
found a good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Much better and more sanitary than the boogers I've been using for decades.

Well, you've never had to worry about running out have you? ;-)

Can you fart at will? (maybe you're the wrong guy to ask)

With the medication I'm on? NO.

Unless of course you're in Church!


Not even then.


--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.

Cling Wrap
 

"Michael A. Terrell" wrote in message
m...

Tom Gardner wrote:

Michael A. Terrell wrote:

Tom Gardner wrote:

Michael A. Terrell wrote:

Tom Gardner wrote:

Bob La Londewrote:

Sometimes you have to put in a screw in a place that you just can't get
your
hand in there and if you drop the screw you are totally hosed. I was
repairing a broken wire in my boat yesterday and ran into one of those. Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. I considered making one, but thought maybe somebody else
would have a better solution.
I did a search for DIY screw holding screwdriver or something like that and
found a good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly
against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Much better and more sanitary than the boogers I've been using for decades.

Well, you've never had to worry about running out have you? ;-)

Can you fart at will? (maybe you're the wrong guy to ask)

With the medication I'm on? NO.

Unless of course you're in Church!


Not even then.



How about snoring in Church? Last Christmas a lady in a wheelchair in the handicap
section with her head back and mouth open was about to receive communion from a young
Eucharistic minister and just as he was about to place the Host on her tongue she let
out a good snore. The look on his face was priceless and the three rows behind
couldn't contain their laughter.

Cling Wrap
 

Michael A. Terrell wrote:
Tom Gardner wrote:
Michael A. Terrell wrote:
Tom Gardner wrote:
Michael A. Terrell wrote:
Tom Gardner wrote:

Much better and more sanitary than the boogers I've been using for
decades.

Well, you've never had to worry about running out have you? ;-)

Can you fart at will? (maybe you're the wrong guy to ask)

With the medication I'm on? NO.

Unless of course you're in Church!

Not even then.

Does this mean that you never know when you're going to fart, or that
you simply have no control and fart spontaneously? I sometimes fart
spontaneously just as I'm climbing out of bed. I think it has something
to do with fiber.

Thanks,
Rich

Cling Wrap
 

On Sun, 13 Feb 2011 18:29:10 -0500, "Tom Gardner" hd@hd wrote:


"Michael A. Terrell" wrote in message
...
Well, you've never had to worry about running out have you? ;-)


Can you fart at will? (maybe you're the wrong guy to ask)

With the medication I'm on? NO.

Unless of course you're in Church!

Most folks wouldn't think that of someone taking

SUPER SPHINCTER SEAL(tm) EPOXY MIX

--
Remember, in an emergency, dial 1911.

Cling Wrap
 

Tom Gardner wrote:

"Michael A. Terrell" wrote in message
m...

Tom Gardner wrote:

Michael A. Terrell wrote:

Tom Gardner wrote:

Michael A. Terrell wrote:

Tom Gardner wrote:

Bob La Londewrote:

Sometimes you have to put in a screw in a place that you just can't get
your
hand in there and if you drop the screw you are totally hosed. I was
repairing a broken wire in my boat yesterday and ran into one of those. Of
course it's a stainless steel screw so a mag tip wouldn't work.

I couldn't find any of the screw holder screwdrivers I used to have, and it
was late enough I wasn't confident in finding one at any stores that would
still be open. I considered making one, but thought maybe somebody else
would have a better solution.
I did a search for DIY screw holding screwdriver or something like that and
found a good tip that worked perfectly.

Poke the screw through some cling wrap.
Place the screw on the screw driver.
Wrap the cling wrap around the screw driver to hold the screw firmly
against
the tip.
Start the screw a couple threads.
Pull back the cling wrap and screwdriver to tear the screw through.
Remove the cling wrap.
Tighten the screw the rest of the way.

Its simple, elegant, works very well, and I wish had thought of it.

Much better and more sanitary than the boogers I've been using for decades.

Well, you've never had to worry about running out have you? ;-)

Can you fart at will? (maybe you're the wrong guy to ask)

With the medication I'm on? NO.

Unless of course you're in Church!


Not even then.



How about snoring in Church? Last Christmas a lady in a wheelchair in the handicap
section with her head back and mouth open was about to receive communion from a young
Eucharistic minister and just as he was about to place the Host on her tongue she let
out a good snore. The look on his face was priceless and the three rows behind
couldn't contain their laughter.


If I'm that tired I either stay home, or sit in the lobby.


--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.

Cling Wrap
 

Larry Jaques wrote:

On Sun, 13 Feb 2011 18:29:10 -0500, "Tom Gardner" hd@hd wrote:


"Michael A. Terrell" wrote in message
...
Well, you've never had to worry about running out have you? ;-)


Can you fart at will? (maybe you're the wrong guy to ask)

With the medication I'm on? NO.

Unless of course you're in Church!

Most folks wouldn't think that of someone taking

SUPER SPHINCTER SEAL(tm) EPOXY MIX


That would be fatal, with the side effects of the Diabetes medicine.
'My cause mild diarrhea' my sore ass!


--
You can't fix stupid. You can't even put a band-aid on it, because it's
Teflon coated.

Cling Wrap
 

Michael A. Terrell wrote:
Larry Jaques wrote:
On Sun, 13 Feb 2011 18:29:10 -0500, "Tom Gardner" hd@hd wrote:
"Michael A. Terrell" wrote in message

Well, you've never had to worry about running out have you? ;-)

Can you fart at will? (maybe you're the wrong guy to ask)

With the medication I'm on? NO.

Unless of course you're in Church!

Most folks wouldn't think that of someone taking

SUPER SPHINCTER SEAL(tm) EPOXY MIX

That would be fatal, with the side effects of the Diabetes medicine.
'My cause mild diarrhea' my sore ass!

Here ya go:
http://www.drugstore.com/qxp215947/d...ite_medium.htm

Hope This Helps!
Rich