Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
100 amp bridege rectifier
I'm looking to rectify 240 VAC into DC with 100 amp surge capacity.
This will power the servo amps on my Matsuura bedmill. I probably won't ask as many questions as Iggy about my winter projectVBG The largest I found is 50 amp: http://www.digikey.com/scripts/DkSea...me=641-1381-ND Do I need to come up with some way to put three in parallel? If I do this do I need to fuse each rectifier? If a 100 amp unit is out there, my life would be simpler. Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Selenium Rectifier / Metal Rectifier queries | Electronics Repair | |||
Selenium Rectifier / Metal Rectifier queries | Electronics Repair | |||
Selenium Rectifier / Metal Rectifier queries | Electronics Repair | |||
Selenium Rectifier / Metal Rectifier queries | Electronics Repair | |||
homebuilt welding rectifier: single diode instead of bridge rectifier? | Metalworking |