DIYbanter - Jarno taper reamers

DIYbanter (https://www.diybanter.com/)

- Metalworking (https://www.diybanter.com/metalworking/)

- - Jarno taper reamers (https://www.diybanter.com/metalworking/309890-jarno-taper-reamers.html)

Jarno taper reamers

I have the potential to buy a bunch of jarno taper reamers at a very
good price. Is there any demand for them? If so, which sizes are
common?

How about taper pin reamers. Same questions.

RWL

Jarno taper reamers

On Mon, 13 Sep 2010 06:34:41 -0500, Ignoramus20659
wrote:

On 2010-09-13, GeoLane at PTD dot NET GeoLane wrote:
I have the potential to buy a bunch of jarno taper reamers at a very
good price. Is there any demand for them? If so, which sizes are
common?

http://completed.shop.ebay.com/i.htm...&LH_Complete=1

Thanks Iggy. That pretty much answers the question. I didn't think
to look on eBay although in retrospect, that's the obvious place you
could get info.

RWL

Jarno taper reamers

On 2010-09-13, GeoLane at PTD dot NET GeoLane wrote:
I have the potential to buy a bunch of jarno taper reamers at a very
good price. Is there any demand for them? If so, which sizes are
common?

How about taper pin reamers. Same questions.

Taper pins are nice useful things. I've got a wooden-boxed set
of taper pin reamers and several sizes of taper pins for use when I need
them.

As for the Jarno taper -- if you have a machine which uses the
Jarno taper -- then you might want a reamer to clean up a buggered
spindle socket. Or if you are making machines in that size range.

I've got the Morse taper reamer set (MT 1 - MT 5) plus a MT 0
which I had from before. I've got the taper pin reamers. I don't need
the Jarno ones -- unless a machine of appropriate size falls into my
lap. (And I don't have room in the shop for such a machine anyway. :-)

Enjoy,
DoN.

--
Remove oil spill source from e-mail
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---