Air leaks
Since I started buying accessories for my compressor I have been noticing
that many leak. The last two were an air filter and a new hose. The filter leaks just below the housing. The hose leaks at both ends at the connectors. I should stress these are not leaks produced by myself through adding connector hardware (all that is done with generous use of Teflon tape - no leaks there!). Admittedly the leaks are very small and detectable only with soapy water. E.g. the two hose leaks did not drop the pressure in the 4 gallon tank significantly over 3 hours. I cannot imagine that leaks of that magnitude in a compressed air system matter all that much (Propane, different story...:-). I am however puzzled as to how common these occurrences are and how acceptable they are considered by others. Are there differences in manufacturers? -- Michael Koblic, Campbell River, BC |
Air leaks
"Kevin(Bluey)" I saw a system on an inventors tv show where a guy has invented a system where the exhaust from air powered tools is fed back into the compressor , reducing noise and recycling the air. I dont know how far he is down the track getting it developed , but I would imagine it could be very cost effective over a period of time. -- Kevin (Bluey) ROTFLMAO !!! |
Air leaks
--Rule #1: don't buy anything that has to hold pressure from H-F.
Stay as far as you can from that blue compressor hose they sell: I've had one burst at 70psi. Get good brand stuff: for quick-connect fittings Amflo is my fave but I'm sure there are others. -- "Steamboat Ed" Haas : A human without a critter Hacking the Trailing Edge! : is incomplete.. www.nmpproducts.com ---Decks a-wash in a sea of words--- |
Air leaks
On Mon, 30 Aug 2010 10:00:19 -0400, "Phil Kangas"
wrote: "Kevin(Bluey)" I saw a system on an inventors tv show where a guy has invented a system where the exhaust from air powered tools is fed back into the compressor , reducing noise and recycling the air. I dont know how far he is down the track getting it developed , but I would imagine it could be very cost effective over a period of time. -- Kevin (Bluey) ROTFLMAO !!! Hey Phil, I sort of wondered if there was going to be an "As Seen On TV" tag-line coming too. On the other hand, exhaust from other sources gets "used" for power and re-supply, so why not?!?! Exhaust turbo-chargers, exhaust steam-injectors, etc. Take care. Brian Lawson, Bothwell, Ontario |
Air leaks
"Brian Lawson" wrote in message On Mon, 30 Aug 2010 10:00:19 -0400, "Phil Kangas" wrote: "Kevin(Bluey)" I saw a system on an inventors tv show where a guy has invented a system where the exhaust from air powered tools is fed back into the compressor , reducing noise and recycling the air. I dont know how far he is down the track getting it developed , but I would imagine it could be very cost effective over a period of time. -- Kevin (Bluey) ROTFLMAO !!! Hey Phil, I sort of wondered if there was going to be an "As Seen On TV" tag-line coming too. On the other hand, exhaust from other sources gets "used" for power and re-supply, so why not?!?! Exhaust turbo-chargers, exhaust steam-injectors, etc. Take care. Brian Lawson, Bothwell, Ontario Move your wallet from your back pocket to a front pocket....;)) phil |
Air leaks
On 2010-08-30, Brian Lawson wrote:
On Mon, 30 Aug 2010 10:00:19 -0400, "Phil Kangas" wrote: "Kevin(Bluey)" I saw a system on an inventors tv show where a guy has invented a system where the exhaust from air powered tools is fed back into the compressor , reducing noise and recycling the air. I dont know how far he is down the track getting it developed , but I would imagine it could be very cost effective over a period of time. ROTFLMAO !!! Hey Phil, I sort of wondered if there was going to be an "As Seen On TV" tag-line coming too. On the other hand, exhaust from other sources gets "used" for power and re-supply, so why not?!?! Exhaust turbo-chargers, exhaust steam-injectors, etc. Recycling exhaust from power tools would not save energy, but it could help keeping shop air cleaner and oil-free. i |
Air leaks
On Aug 30, 10:18*am, steamer wrote:
* * * * --Rule #1: don't buy anything that has to hold pressure from H-F. Stay as far as you can from that blue compressor hose they sell: I've had one burst at 70psi. Get good brand stuff: for quick-connect fittings Amflo is my fave but I'm sure there are others. -- * * * * "Steamboat Ed" Haas * * * * : *A human without a critter * * * * * Hacking the Trailing Edge! *: *is incomplete.. * * * * * * * * * * * * *www.nmpproducts.com * * * * * * * * * *---Decks a-wash in a sea of words--- I've not had one burst, it's done a pretty good imitation of a coil spring in cooler(40 degree) weather, though. The black rubber Goodyear hose is good on sale, works at any temp. Same with the Amflo fittings they sell in bulk. Stay far away from those bubble-packed brass ends if you don't want leaks. All those quick-connects need periodic testing, anyway. Rubber seals only last so long. Stan |
Air leaks
On Sun, 29 Aug 2010 21:12:24 -0700, Michael Koblic wrote:
Since I started buying accessories for my compressor I have been noticing that many leak. The last two were an air filter and a new hose. The filter leaks just below the housing. The hose leaks at both ends at the connectors. I should stress these are not leaks produced by myself through adding connector hardware (all that is done with generous use of Teflon tape - no leaks there!). Admittedly the leaks are very small and detectable only with soapy water. E.g. the two hose leaks did not drop the pressure in the 4 gallon tank significantly over 3 hours. I cannot imagine that leaks of that magnitude in a compressed air system matter all that much (Propane, different story...:-). I am however puzzled as to how common these occurrences are and how acceptable they are considered by others. Are there differences in manufacturers? I sit in a factory, where they have air pipes throughout the shop. I noticed that the compressor keeps coming on, even if nobody's using any air. I asked, "Do you suppose there's a leak in all that pluming?" (It's routed along the ceining, 20' high). They said, no, the pipes have been thoroughly tested; it's the compressor seals themselves that are leaking. Hope This Helps! Rich |
Air leaks
On 2010-09-08, Rich Grise wrote:
On Sun, 29 Aug 2010 21:12:24 -0700, Michael Koblic wrote: Since I started buying accessories for my compressor I have been noticing that many leak. The last two were an air filter and a new hose. The filter leaks just below the housing. The hose leaks at both ends at the connectors. I should stress these are not leaks produced by myself through adding connector hardware (all that is done with generous use of Teflon tape - no leaks there!). Admittedly the leaks are very small and detectable only with soapy water. E.g. the two hose leaks did not drop the pressure in the 4 gallon tank significantly over 3 hours. I cannot imagine that leaks of that magnitude in a compressed air system matter all that much (Propane, different story...:-). I am however puzzled as to how common these occurrences are and how acceptable they are considered by others. Are there differences in manufacturers? I sit in a factory, where they have air pipes throughout the shop. I noticed that the compressor keeps coming on, even if nobody's using any air. I asked, "Do you suppose there's a leak in all that pluming?" (It's routed along the ceining, 20' high). They said, no, the pipes have been thoroughly tested; it's the compressor seals themselves that are leaking. I heard about an invention called "check valve". It might help! i |
All times are GMT +1. The time now is 03:43 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter