Enco Bore Gage?
 

Enco has "Quality Dial Bore Gage Sets"on sale for ~$35, marked down
from ~$100. Stock numbers are TF240-0112 for 0.24" - 0.4" and
TF240-0113 for 0.4" - 0.7". Does anyone know how serviceable these
are, with or without the supplied indicator?

I bought their $30 0.2"-1.2" inside micrometer, expecting to have to
measure over the pins with a good mike, but it's actually quite good.
I aligned the marks at 0.300 and measured 0.3001 over the pins.

jsw

Enco Bore Gage?
 

On Jul 31, 8:26*am, Jim Wilkins wrote:
Enco has "Quality Dial Bore Gage Sets"on sale for ~$35, marked down
from ~$100. Stock numbers are TF240-0112 for 0.24" - 0.4" and
TF240-0113 for 0.4" - 0.7". Does anyone know how serviceable these
are, with or without the supplied indicator? ...
jsw

Now that I've posted I can open up another tab to find them:
http://www.use-enco.com/CGI/INPAGE?P...cials/327-2828
Google Groups does have its limits.

jsw

Enco Bore Gage?
 

Jim,
For that price you can afford to throw it away if it doesn't work.
Steve

"Jim Wilkins" wrote in message ...
Enco has "Quality Dial Bore Gage Sets"on sale for ~$35, marked down
from ~$100. Stock numbers are TF240-0112 for 0.24" - 0.4" and
TF240-0113 for 0.4" - 0.7". Does anyone know how serviceable these
are, with or without the supplied indicator?

I bought their $30 0.2"-1.2" inside micrometer, expecting to have to
measure over the pins with a good mike, but it's actually quite good.
I aligned the marks at 0.300 and measured 0.3001 over the pins.

jsw

Enco Bore Gage?
 

On Sat, 31 Jul 2010 05:39:36 -0700 (PDT), Jim Wilkins
wrote:

On Jul 31, 8:26*am, Jim Wilkins wrote:
Enco has "Quality Dial Bore Gage Sets"on sale for ~$35, marked down
from ~$100. Stock numbers are TF240-0112 for 0.24" - 0.4" and
TF240-0113 for 0.4" - 0.7". Does anyone know how serviceable these
are, with or without the supplied indicator? ...
jsw

Now that I've posted I can open up another tab to find them:
http://www.use-enco.com/CGI/INPAGE?P...cials/327-2828
Google Groups does have its limits.

jsw

Damn! I could use about 3 of those sets in different sizes too!

This economy really sucks!!!!!!!!!!!!


Gunner


"A conservative who doesn't believe? in God simply doesn't pray;
a godless liberal wants no one to pray. A conservative who doesn't
like guns doesn't buy one; a liberal gun-hater wants to disarm us all.
A gay conservative has sex his own way; a gay liberal requires us all
to watch and accept his perversion and have it taught to children.
A conservative who is offended by a radio show changes the station;
an offended liberal wants it banned, prosecuted and persecuted."
Bobby XD9

Enco Bore Gage?
 

I couldn't pass this up. So, i bought two sizes.

Enter code PFSJUN for free shipping.

Karl

Enco Bore Gage?
 

On Jul 31, 6:51*pm, "Karl Townsend"
wrote:
I couldn't pass this up. So, i bought two sizes.

Enter code PFSJUN for free shipping.

Karl

Thanks. Let me know if they are any good.

jsw

Enco Bore Gage?
 

On Sat, 31 Jul 2010 05:26:58 -0700 (PDT), Jim Wilkins
wrote:

Enco has "Quality Dial Bore Gage Sets"on sale for ~$35, marked down
from ~$100. Stock numbers are TF240-0112 for 0.24" - 0.4" and
TF240-0113 for 0.4" - 0.7". Does anyone know how serviceable these
are, with or without the supplied indicator?


I think someone else had gotten these and commented that they were
unexpectedly good quality for the money, so I ordered the 0.24-0.4 set
and the 0.4-0.7 set. On the web site both gage sets are pictured with
a wooden box.

The 0.4-0.7 set arrived first. Although the box was red plastic, it
had a metal latch and a real hinge on the back of the case, and the
interior had well fitted gray foam. It came with a sheet of
instructions. The gage worked and was repeatable. The dial indicator
that came with it had MHC on the face. I prefer wooden cases, but the
plastic case was of decent quality, so OK, I'm only minimally
disappointed.

The 0.24-0.4 set arrived yesterday. A little disappointing. It
arrived in a Harbor Freight quality red blow molded case with poorly
fitting interior compartments. No instructions in the box. The
anvils didn't quite have a good looking finish. The supplied wrench
was a really sloppy fit on the tiny nut at the end. The dial
indicator cosmetically looked identical to the one in the 0.4-07 set,
but did not have MHC on the face of the dial. The measurements were
repeatable. The poor case and the sloppy wrench detracted from what
is probably an OK gage.

I checked the catalog number and that matches with what I ordered, and
the web site shows the sets with wooden boxes. The wooden case
pictured on the web site is almost bait and switch compared to what I
got. Is this typical of Enco currently? I haven't bought much from
them in the past few years.

RWL

Enco Bore Gage?
 

On Sep 4, 10:13*pm, GeoLane at PTD dot NET GeoLane at PTD dot NET
wrote:
On Sat, 31 Jul 2010 05:26:58 -0700 (PDT), Jim Wilkins
...
The 0.24-0.4 set arrived yesterday. *A little disappointing. *It
arrived in a Harbor Freight quality red blow molded case with poorly
fitting interior compartments. *No instructions in the box. * The
anvils didn't quite have a good looking finish. *The supplied wrench
was a really sloppy fit on the tiny nut at the end. *The dial
indicator cosmetically looked identical to the one in the 0.4-07 set,
but did not have MHC on the face of the dial. *The measurements were
repeatable. *The poor case and the sloppy wrench detracted from what
is probably an OK gage. *...
RWL

I received the .2-.4 and .4-.7 ones together and both are of the same
decent quality, in red plastic boxes marked MHC. The instructions
don't apply to the small sizes and when I checked for better ones on
the website the smaller one was listed as on backorder, so apparently
you got a substitute.

jsw