Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Vertex Rotary Table
I recently received a Vertex rotary table and was curious as to what
the consensus is on these numbers gotten off of the enclosed certificate. Would these be considered average quality numbers?: http://cgi.ebay.com/ws/eBayISAPI.dll...m=370372023627 1) Flatness of clamping surface(Concave): 0.0008" 2) Parallelism of clamping surface to base: 0.0008" 3) Squareness of clamping surface to angle face: 0.0008" 4) True running of clamping surface: 0.0006" 5) True running of center hole (1) Measured at hole edge: 0.0008" (2) Measured at arbor 4-in. long: 0.0012" 6) Indexing accuracy of direct indexing mechanism: Maximum cumulative spacing error: .50" Thanks. Darren Harris Staten Island, New York. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Rotary Table ??? | Metalworking | |||
3 jaw chuck for rotary table | Metalworking | |||
Rotary table | Metalworking | |||
Rotary table ID? | Metalworking | |||
Rotary table help. | Metalworking |