bucky wire feed
"The kid" was trying to weld irrigation pipe today. My Century 500 (private
label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? Also, I'm looking for a manual. Anybody know of a link? Karl |
bucky wire feed
"Karl Townsend" wrote in message anews.com... "The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? Also, I'm looking for a manual. Anybody know of a link? Karl I was having trouble with my Lincoln that sounded like that. It was the crappy little contacts in the handle. I still have to replace it, but it's working now, sooooooooo .............. Steve |
bucky wire feed
Karl Townsend wrote:
"The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? Also, I'm looking for a manual. Anybody know of a link? Karl Replace the contact tip. |
bucky wire feed
"Karl Townsend" wrote:
"The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? Does the drive motor that feeds the wire have brushes? If so, check them. Wes |
bucky wire feed
On Fri, 19 Mar 2010 18:03:07 -0500, "Karl Townsend"
wrote: "The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? Also, I'm looking for a manual. Anybody know of a link? Karl It's not something silly like the other end of the wire sticking out of the side of the reel catching on something sometimes, is it? Mark Rand RTFM |
bucky wire feed
Mark Rand fired this volley in
: On Fri, 19 Mar 2010 18:03:07 -0500, "Karl Townsend" wrote: "The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? Yeah, Karl. Replace the damned worn-out (or wrong-sized) tip. Once a tip gets severely over-sized, it tends to allow the wire to wobble around instead of staying in constant contact with some part of the bore. When it does, the wire "spot welds" itself to some part of the bore of the tip. The wire must always contact the bore _firmly_, but not tight, or this will happen every time. LLoyd |
bucky wire feed
On Fri, 19 Mar 2010 20:39:26 -0500, "Lloyd E. Sponenburgh"
lloydspinsidemindspring.com wrote: Mark Rand fired this volley in : On Fri, 19 Mar 2010 18:03:07 -0500, "Karl Townsend" wrote: "The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? Yeah, Karl. Replace the damned worn-out (or wrong-sized) tip. Once a tip gets severely over-sized, it tends to allow the wire to wobble around instead of staying in constant contact with some part of the bore. When it does, the wire "spot welds" itself to some part of the bore of the tip. The wire must always contact the bore _firmly_, but not tight, or this will happen every time. LLoyd Ayup. Tips..buy em 5 at a time and check em regularly. Gunner "First Law of Leftist Debate The more you present a leftist with factual evidence that is counter to his preconceived world view and the more difficult it becomes for him to refute it without losing face the chance of him calling you a racist, bigot, homophobe approaches infinity. This is despite the thread you are in having not mentioned race or sexual preference in any way that is relevant to the subject." Grey Ghost |
bucky wire feed
On Fri, 19 Mar 2010 18:03:07 -0500, "Karl Townsend"
wrote: "The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? It can't be both a Century and a Lincoln, they're competitors. Check the condition of the wire. My little Lincoln SP125+ exhibits the behaviour you describe with wire that is dirty or even mildly rusty as in corroded or tarnished. I never leave wire in that machine, always bag it after use and backfill the baggie with dry argon from the TIG. No problems since I adopted that practice. Mr. Miller (Millermatic 210) does not require such TLC. The little Linc works superbly with thin metal like autobody so I tolerate its fussiness about wire condition. |
bucky wire feed
On Sat, 20 Mar 2010 01:15:21 -0500, Don Foreman
wrote: On Fri, 19 Mar 2010 18:03:07 -0500, "Karl Townsend" wrote: "The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? It can't be both a Century and a Lincoln, they're competitors. (actually...Lincoln owns Century...just a heads up...G) Gunner Check the condition of the wire. My little Lincoln SP125+ exhibits the behaviour you describe with wire that is dirty or even mildly rusty as in corroded or tarnished. I never leave wire in that machine, always bag it after use and backfill the baggie with dry argon from the TIG. No problems since I adopted that practice. Mr. Miller (Millermatic 210) does not require such TLC. The little Linc works superbly with thin metal like autobody so I tolerate its fussiness about wire condition. "First Law of Leftist Debate The more you present a leftist with factual evidence that is counter to his preconceived world view and the more difficult it becomes for him to refute it without losing face the chance of him calling you a racist, bigot, homophobe approaches infinity. This is despite the thread you are in having not mentioned race or sexual preference in any way that is relevant to the subject." Grey Ghost |
bucky wire feed
On Sat, 20 Mar 2010 00:55:53 -0700, Gunner Asch
wrote: On Sat, 20 Mar 2010 01:15:21 -0500, Don Foreman wrote: On Fri, 19 Mar 2010 18:03:07 -0500, "Karl Townsend" wrote: "The kid" was trying to weld irrigation pipe today. My Century 500 (private label Sears made by Lincoln) Mig welder was giving him fits. The wire will hang up just 1/2 a second every now and then. Changes the arc length on him. We've replaced the liner and feed rolls, no joy. Any other suggestions? It can't be both a Century and a Lincoln, they're competitors. (actually...Lincoln owns Century...just a heads up...G) Gunner http://www.lincolnelectric.com/corpo...ut/history.asp 2003 – Lincoln complements its successful line of retail products with the acquisition of the Century and Marquette welding and battery charger brands, which have leading positions in the automotive aftermarket and retail channels. G "First Law of Leftist Debate The more you present a leftist with factual evidence that is counter to his preconceived world view and the more difficult it becomes for him to refute it without losing face the chance of him calling you a racist, bigot, homophobe approaches infinity. This is despite the thread you are in having not mentioned race or sexual preference in any way that is relevant to the subject." Grey Ghost |
All times are GMT +1. The time now is 06:31 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter