Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Injection molding
--Well I finally finished the die I've been working on sporadically.
Trouble was I didn't have my injection molding machine dialled in yet but I reeeally wanted to see if the die produced a decent part. I could have used casting resin but that stuff's pretty brittle. In a moment of inspiration I thot why not use hot glue? I did and it works! Crummy photos he http://www.flickr.com/photos/steambo...7613636548203/ --Will try to do better close-ups with more contrasty background later today. -- "Steamboat Ed" Haas : Blue Cross socks us Hacking the Trailing Edge! : $23,000/yr!! ... www.nmpproducts.com ---Decks a-wash in a sea of words--- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Injection molding forum? | Metalworking | |||
Injection Molding Machine - Gingery - Machining Tolerances | Metalworking | |||
Injection Mold | Metalworking | |||
Injection Mold | Home Repair | |||
DIY damp injection | UK diy |