 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Free motors
Cleaned out the back room - it had gotten so bad that I could not get to
the back shelves. Pickup only, in Carlisle, MA 1 HP, 3 ph, 1755 rpm http://home.comcast.net/~bobengelhar...s/DSCF0009.JPG 1 HP, 1 ph, 1725 rpm, "TEFC" (cap included, but not shown) http://home.comcast.net/~bobengelhar...s/DSCF0007.JPG 3 HP, 1 ph, 3740 rpm http://home.comcast.net/~bobengelhar...s/DSCF0005.JPG 1-1/2 HP, 1 ph, 3450 rpm http://home.comcast.net/~bobengelhar...s/DSCF0003.JPG Direct drive clothes washer motors: 1 HP(?), 3 ph, 16000 rpm at 286 Hz (3350+- at 60 Hz), some kind of encoders on shafts http://home.comcast.net/~bobengelhar...s/DSCF0002.JPG the plate on this one only says 16000 rpm http://home.comcast.net/~bobengelhar...s/DSCF0001.JPG Going (back) to the dump on Saturday. Although I will hold if pickup this week is a problem. Bob |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Free motors
In article ,
Bob Engelhardt wrote: Cleaned out the back room - it had gotten so bad that I could not get to the back shelves. Pickup only, in Carlisle, MA 1 HP, 3 ph, 1755 rpm http://home.comcast.net/~bobengelhar...s/DSCF0009.JPG 1 HP, 1 ph, 1725 rpm, "TEFC" (cap included, but not shown) http://home.comcast.net/~bobengelhar...s/DSCF0007.JPG 3 HP, 1 ph, 3740 rpm http://home.comcast.net/~bobengelhar...s/DSCF0005.JPG 1-1/2 HP, 1 ph, 3450 rpm http://home.comcast.net/~bobengelhar...s/DSCF0003.JPG Direct drive clothes washer motors: 1 HP(?), 3 ph, 16000 rpm at 286 Hz (3350+- at 60 Hz), some kind of encoders on shafts http://home.comcast.net/~bobengelhar...s/DSCF0002.JPG the plate on this one only says 16000 rpm http://home.comcast.net/~bobengelhar...s/DSCF0001.JPG Going (back) to the dump on Saturday. Although I will hold if pickup this week is a problem. The Tool Shed in Waltham MA may be interested in these motors. Better than trashing them. The Tool Shed deals in used tools. Joe Gwinn |
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Free motors
"Bob Engelhardt" wrote in message
... Cleaned out the back room - it had gotten so bad that I could not get to the back shelves. Pickup only, in Carlisle, MA 1 HP, 3 ph, 1755 rpm http://home.comcast.net/~bobengelhar...s/DSCF0009.JPG 1 HP, 1 ph, 1725 rpm, "TEFC" (cap included, but not shown) http://home.comcast.net/~bobengelhar...s/DSCF0007.JPG 3 HP, 1 ph, 3740 rpm http://home.comcast.net/~bobengelhar...s/DSCF0005.JPG 1-1/2 HP, 1 ph, 3450 rpm http://home.comcast.net/~bobengelhar...s/DSCF0003.JPG Direct drive clothes washer motors: 1 HP(?), 3 ph, 16000 rpm at 286 Hz (3350+- at 60 Hz), some kind of encoders on shafts http://home.comcast.net/~bobengelhar...s/DSCF0002.JPG the plate on this one only says 16000 rpm http://home.comcast.net/~bobengelhar...s/DSCF0001.JPG Going (back) to the dump on Saturday. Although I will hold if pickup this week is a problem. Dayum.... yer right up I-95 from me.... but 203 mi, one way.... sigh Hey, why don't take the Missus to Rockyfella Center or Lincoln Center (Valentines Day), or sumpn, and swing by Yonkas? I'll take you to the Broadway Diner.... hopefully there won't be any street brawls from the adjacent clubs.... goodgawd.... -- EA Yonkers, NY Bob |
|
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Free motors
Thanks. I did send the email to some of my mailing lists.
Your area might have a Freecycle in your area. In my area, the Freecycle is badly managed, and several competing lists exist. -- Christopher A. Young Learn more about Jesus www.lds.org .. "Bob Engelhardt" wrote in message ... Cleaned out the back room - it had gotten so bad that I could not get to the back shelves. Pickup only, in Carlisle, MA 1 HP, 3 ph, 1755 rpm http://home.comcast.net/~bobengelhar...s/DSCF0009.JPG 1 HP, 1 ph, 1725 rpm, "TEFC" (cap included, but not shown) http://home.comcast.net/~bobengelhar...s/DSCF0007.JPG 3 HP, 1 ph, 3740 rpm http://home.comcast.net/~bobengelhar...s/DSCF0005.JPG 1-1/2 HP, 1 ph, 3450 rpm http://home.comcast.net/~bobengelhar...s/DSCF0003.JPG Direct drive clothes washer motors: 1 HP(?), 3 ph, 16000 rpm at 286 Hz (3350+- at 60 Hz), some kind of encoders on shafts http://home.comcast.net/~bobengelhar...s/DSCF0002.JPG the plate on this one only says 16000 rpm http://home.comcast.net/~bobengelhar...s/DSCF0001.JPG Going (back) to the dump on Saturday. Although I will hold if pickup this week is a problem. Bob |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Stepping Motors, Hobby Motors for Sale | Electronics Repair | |||
| Free electric motors in the UK | Metalworking | |||
| Stepper motors and Servo motors for CNC | Metalworking | |||
| FS: DC Motors, Stepping Motors Surplus and Salvage | Electronics Repair | |||
| FS: DC Motors, Stepping Motors Surplus and Salvage | Electronics Repair | |||
Linear Mode
