 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Reeves-drive belts for Clausing 5900-series lathes
There has been some traffic on belts for the the Reeves (variable-speed)
drive, for which Clausing wants about $100. I bought these belts from Motion Industries (http::/www.motionindustries.com) for about half that in January 2008. One orders over the phone (781-376-5800, which is near me), credit card in hand. The Reeves Drive belt is Gates 1930V400 and cost $50. I also got the timing belt that drives the 5914 spindle, a Gates 630H150, for $39, because replacing belts is a big deal and so I replaced all belts at once. I got these two part numbers from other HSMs, not from Motion Industries. Joe Gwinn |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Clausing 5914 - Reeves drive pulley squeaks | Metalworking | |||
| Clausing 5900-series metric gear chart | Metalworking | |||
| Wanted: Clausing 5900 series lathe part | Metalworking | |||
| Clausing 5900 Series Lathe Model ID Chart | Metalworking | |||
| WTD: Clausing 5900 Series Info | Metalworking | |||
Linear Mode
