 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Best place to tie into water
I have the black pipe ran into my crawl space and everything is
installed. Last hing to do is to tie into my water. I have a 3/4 inch pvc coming from the water meter that starts the feed to my house. Shoudl I just install a T there? Will this cause any water pressure problems in the house? |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Best place to tie into water
Only if your combined demand is greater than your 3/4 pipe can flow from your meter. Try not to use a 90 degree "T". A "Y" is much
less restricting. Steve "stryped" wrote in message ... I have the black pipe ran into my crawl space and everything is installed. Last hing to do is to tie into my water. I have a 3/4 inch pvc coming from the water meter that starts the feed to my house. Shoudl I just install a T there? Will this cause any water pressure problems in the house? |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Best Place to Install Water Hammer Arrestor *and* do they work? | Home Repair | |||
| My pipes froze and now did break, water all over the place... | Home Repair | |||
| No water from the facet in the Kitchen, every other place is okay | Home Repair | |||
| Cheapest place for water softener salt | UK diy | |||
| Installing a pan, with water heater in place. | Home Repair | |||
![stryped[_3_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Linear Mode
