Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Cheap click-stop torque wrench
Bob Engelhardt wrote:
You're probably thinking that I'm all-but-decided on the HF and you're right. At 8X the cost, I just can't see the S-O, or 5+X, the Kobalt. But if somebody's familiar with the HF & knows that it's a POS, I'd like to hear it. When I was in the Marines back in the mid to late 70's, I asked why we didn't have click stop torque wrenches for critical fasteners. I was told that the failure rate on first recalibration was over 33%. We used a beam wrench with a dial indicator. Not as easy to use but it was more accurate. Having said that, torquing something where you can't see the dial or pointer is a pita. A thought would be to buy the HF clicker and make a calibrator of sorts from a good old craftsman beam type. I thought they made one with the square drive on both ends. That would be sweet. Not sure the picture will work. http://s.sears.com/is/image/Sears/00... m=0.9,0.5,0,0 Wes |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Measuring torque on a motor with a leadscrew with a torque wrench | Metalworking | |||
Measuring torque on a motor with a leadscrew with a torque wrench | Metalworking | |||
Torque wrench | UK diy | |||
What's a torque wrench? | Home Repair |