|
Large surface grinder-craigslist
I don't have any interest in this grinder but when I saw
the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday. |
Large surface grinder-craigslist
a little bit north, (glendale) we have
http://losangeles.craigslist.org/wst...332528082.html "rigger" wrote in message ... I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday. |
Large surface grinder-craigslist
On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger
wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. |
Large surface grinder-craigslist
On 2009-08-21, Bill Noble wrote:
a little bit north, (glendale) we have http://losangeles.craigslist.org/wst...332528082.html Surface grinder market is not what it used to be. I was at a factory recently, and the owner was begging me to take a Boyar-Shultz surface grinder for $100, but I had to decline as my truck was full. i "rigger" wrote in message ... I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday. |
Large surface grinder-craigslist
"Ignoramus15924" wrote in message ... On 2009-08-21, Bill Noble wrote: a little bit north, (glendale) we have http://losangeles.craigslist.org/wst...332528082.html Surface grinder market is not what it used to be. I was at a factory recently, and the owner was begging me to take a Boyar-Shultz surface grinder for $100, but I had to decline as my truck was full. i "rigger" wrote in message ... I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday. I remember the days when no one had surface grinders. My dad shaved the heads of maybe 60% of the V8-60 racecar engines west of the Mississippi. He made a gig that screwed into the sparkplug holes and he could chuck up the head. Racers sent him lots of heads. When Flycutters came out, that business quickly died. |
Large surface grinder-craigslist
On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote:
On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. |
Large surface grinder-craigslist
On Fri, 21 Aug 2009 12:32:23 -0700, Gunner Asch
wrote: On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote: On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. per the picture its a surface grinder, looks like a hand cranked model to me. http://chico.craigslist.org/tls/1332333889.html Thank You, Randy Remove 333 from email address to reply. |
Large surface grinder-craigslist
On Mon, 24 Aug 2009 09:55:29 -0400, Randy wrote:
On Fri, 21 Aug 2009 12:32:23 -0700, Gunner Asch wrote: On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote: On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. per the picture its a surface grinder, looks like a hand cranked model to me. http://chico.craigslist.org/tls/1332333889.html Thank You, Randy Remove 333 from email address to reply. That indeed IS a surface grinder. One sees far more Landis OD grinders than Surface Grinders. I almost brought one home from the factory I just tore down...but didnt have a truck big enough to move it. http://www.usedequip.com/q/showdlist...03000,10140591 An example...shrug Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. |
Large surface grinder-craigslist
"Gunner Asch" wrote in message ... On Mon, 24 Aug 2009 09:55:29 -0400, Randy wrote: On Fri, 21 Aug 2009 12:32:23 -0700, Gunner Asch wrote: On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote: On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. per the picture its a surface grinder, looks like a hand cranked model to me. http://chico.craigslist.org/tls/1332333889.html Thank You, Randy Remove 333 from email address to reply. That indeed IS a surface grinder. One sees far more Landis OD grinders than Surface Grinders. I almost brought one home from the factory I just tore down...but didnt have a truck big enough to move it. http://www.usedequip.com/q/showdlist...03000,10140591 An example...shrug Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Heck, 16,000 pounds of scrap at only 10 cents a pound would make a nice profit. 25 cents would make a really nice profit. |
Large surface grinder-craigslist
On Mon, 24 Aug 2009 21:18:02 -0700, "Calif Bill"
wrote: "Gunner Asch" wrote in message .. . On Mon, 24 Aug 2009 09:55:29 -0400, Randy wrote: On Fri, 21 Aug 2009 12:32:23 -0700, Gunner Asch wrote: On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote: On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. per the picture its a surface grinder, looks like a hand cranked model to me. http://chico.craigslist.org/tls/1332333889.html Thank You, Randy Remove 333 from email address to reply. That indeed IS a surface grinder. One sees far more Landis OD grinders than Surface Grinders. I almost brought one home from the factory I just tore down...but didnt have a truck big enough to move it. http://www.usedequip.com/q/showdlist...03000,10140591 An example...shrug Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Heck, 16,000 pounds of scrap at only 10 cents a pound would make a nice profit. 25 cents would make a really nice profit. In california..they are paying .30 per pound in some places. 8 tons does require some special handling techniques though. Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. |
Large surface grinder-craigslist
"Gunner Asch" wrote in message ... On Mon, 24 Aug 2009 21:18:02 -0700, "Calif Bill" wrote: "Gunner Asch" wrote in message . .. On Mon, 24 Aug 2009 09:55:29 -0400, Randy wrote: On Fri, 21 Aug 2009 12:32:23 -0700, Gunner Asch wrote: On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote: On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. per the picture its a surface grinder, looks like a hand cranked model to me. http://chico.craigslist.org/tls/1332333889.html Thank You, Randy Remove 333 from email address to reply. That indeed IS a surface grinder. One sees far more Landis OD grinders than Surface Grinders. I almost brought one home from the factory I just tore down...but didnt have a truck big enough to move it. http://www.usedequip.com/q/showdlist...03000,10140591 An example...shrug Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Heck, 16,000 pounds of scrap at only 10 cents a pound would make a nice profit. 25 cents would make a really nice profit. In california..they are paying .30 per pound in some places. 8 tons does require some special handling techniques though. Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Not really, just a bigger truck than I have. But I could tow the trailer with it. |
Large surface grinder-craigslist
On Tue, 25 Aug 2009 18:11:37 -0700, "Calif Bill"
wrote: "Gunner Asch" wrote in message .. . On Mon, 24 Aug 2009 21:18:02 -0700, "Calif Bill" wrote: "Gunner Asch" wrote in message ... On Mon, 24 Aug 2009 09:55:29 -0400, Randy wrote: On Fri, 21 Aug 2009 12:32:23 -0700, Gunner Asch wrote: On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote: On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. per the picture its a surface grinder, looks like a hand cranked model to me. http://chico.craigslist.org/tls/1332333889.html Thank You, Randy Remove 333 from email address to reply. That indeed IS a surface grinder. One sees far more Landis OD grinders than Surface Grinders. I almost brought one home from the factory I just tore down...but didnt have a truck big enough to move it. http://www.usedequip.com/q/showdlist...03000,10140591 An example...shrug Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Heck, 16,000 pounds of scrap at only 10 cents a pound would make a nice profit. 25 cents would make a really nice profit. In california..they are paying .30 per pound in some places. 8 tons does require some special handling techniques though. Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Not really, just a bigger truck than I have. But I could tow the trailer with it. So you would simply stick a dolly under it and move it out to the trailer? G Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. |
Large surface grinder-craigslist
"Gunner Asch" wrote in message ... On Tue, 25 Aug 2009 18:11:37 -0700, "Calif Bill" wrote: "Gunner Asch" wrote in message . .. On Mon, 24 Aug 2009 21:18:02 -0700, "Calif Bill" wrote: "Gunner Asch" wrote in message m... On Mon, 24 Aug 2009 09:55:29 -0400, Randy wrote: On Fri, 21 Aug 2009 12:32:23 -0700, Gunner Asch wrote: On Fri, 21 Aug 2009 08:38:48 -0400, Randy wrote: On Thu, 20 Aug 2009 09:44:36 -0700 (PDT), rigger wrote: I don't have any interest in this grinder but when I saw the price and photo I knew I had to post it. Large Surface Grinder - $250 (Chico) (California) -------------------------------------------------------------------------------- Date: 2009-08-19, 8:47PM PDT Reply to: [Errors when replying to ads?] -------------------------------------------------------------------------------- This is a large Landis surface grinder with a 12" wheel and a 6" x 18" magnetic chuck in good condition for only $250. Please call KARL at 895-3838 extension #48 between the hours of 6:00 am and 2:30 pm, Monday thru Thursday Surface grinders aren't worth crap I've been trying to sell an 8 x 24 for $400 and it will not sell, the chuck is worth $600. I'm going to cut it up for scrap and just save the chuck. I did buy an absolutely beautiful Brown and Sharpe Techmaster 8 x24 for $2000 about a year ago. So low prices can be good too. Thank You, Randy Remove 333 from email address to reply. Landis made various surface grinders..but based on the info..it sounds far more like an OD grinder. Which Landis made their name on. Good stuff Maynard. per the picture its a surface grinder, looks like a hand cranked model to me. http://chico.craigslist.org/tls/1332333889.html Thank You, Randy Remove 333 from email address to reply. That indeed IS a surface grinder. One sees far more Landis OD grinders than Surface Grinders. I almost brought one home from the factory I just tore down...but didnt have a truck big enough to move it. http://www.usedequip.com/q/showdlist...03000,10140591 An example...shrug Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Heck, 16,000 pounds of scrap at only 10 cents a pound would make a nice profit. 25 cents would make a really nice profit. In california..they are paying .30 per pound in some places. 8 tons does require some special handling techniques though. Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Not really, just a bigger truck than I have. But I could tow the trailer with it. So you would simply stick a dolly under it and move it out to the trailer? G Gunner Whenever a Liberal utters the term "Common Sense approach"....grab your wallet, your ass, and your guns because the sombitch is about to do something damned nasty to all three of them. Furniture dolly. :) Or a bunch of Det cord to cut it up. May not work, but would be fun. |
| All times are GMT +1. The time now is 09:50 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter