Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
axle bent
I made a rear axle for my rigid-framed motorcycle out of 4140 steel, and
the thing bent in use. I was advised that heat-treatment was optional, but not really necessary, so I didn't do that. Was this advice wrong? The axle diameter is 9/16", and bike weight = 375 lbs. I do sometimes hit the odd pothole, but nothing major. Jordan |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Axle End Cap | Home Repair | |||
Welding on Car axle | Metalworking | |||
Welding on Car axle | Metalworking | |||
Identifying axle | Metalworking | |||
cutting an axle | Metalworking |