Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Will this transformer work?
Folks,
I have a line on this three phase transformer. I want to step up 220V three phase out of my 15 HP RPC to 480V so that I could power up my recently acquired Brown & Sharpe #2 vertical mill made in the 50's. There are many here who are in the know on industrial electrics. Can I please have a quick review on the specs of this transformer in the link below and verify for me that if wired 220V 3 phase on the secondary, I could get 480V 3 phase out of the primary? Thanks. http://www.jeffersonelectric.com/cgi...-000&query=423 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How Does the Transformer Work? | Electronics | |||
Mitsubishi WS48311 Television 1080i - Front panel buttons do not work, or work intermittently | Electronics Repair | |||
Using 3ph transformer as single pahse transformer | Metalworking | |||
CCTV Ground Loop transformer ok for Audio work ? | Electronics Repair |