Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Wheel bearings
I haven't had a lot of experience with these. I bought a used boat
recently. 14" tires, a 16' Lund boat. What do I look for on inspection? Do the bearings slide off, or do I need a puller? When I tighten the nut down to contact, then back off a little, I get a slight growl on spinning. Haven't pulled it all apart for a visual. TIA Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kaydon Bearings Ulta slim bearings - cost is prohibitive -Alternative supplier?? | Metalworking | |||
Metric bearings in imperial wheel rims | UK diy | |||
Erde trailer wheel bearings | UK diy | |||
Erde trailer wheel bearings | UK diy |