Grizzly Tools
Who could say no to Grizzly Tools? It is quickly making a name for
itself by being the America’s favorite and one of the largest machinery companies in the US. These tools have been approved by thousands of people and can be found in a wide variety of shops, from those of hobbyists all the way to large industrial producers. With Grizzly Tools, there is no middleman or distributor. Selling their own product, instead of someone else’s, drastically reduced the average price of their items. Nobody beats its high quality, durability and low cost. You can either purchase Grizzly Tools at their showroom/outlet stores, from their free mail order catalog or from their comprehensive online store. Their showroom/outlet stores are usually hundreds of thousands of square feet filled with practically all of their products and you can find them in Pennsylvania, Washington and Missouri. They offer you and extensive variety of tools including bandsaws (metal and wood), drill presses, sanders, planers, grinders, milling machines and much, much more. Ordering Grizzly Tools is quick and easy due to the fact that 99% of their items ship the same day. Why settle for other tools when you can have high quality tools at a very reasonable price? Definitely look into Grizzly Tools! I personally guarantee it. Source: http://grizzlytools.zoxic.com |
Grizzly Tools
On May 8, 9:51*pm, Rob wrote:
Who could say no to Grizzly Tools? Source:http://grizzlytools.zoxic.com http://ezinearticles.com/?expert_bio=Jim_McDowell |
Grizzly Tools
On May 9, 6:26*am, Jim Wilkins wrote:
On May 8, 9:51*pm, Rob wrote: Who could say no to Grizzly Tools? Source:http://grizzlytools.zoxic.com http://ezinearticles.com/?expert_bio=Jim_McDowell LOL |
Grizzly Tools
On May 9, 2:51*am, Rob wrote:
Who could say no to Grizzly Tools? I have some friends that have a Grizzley Drill Press. The motor make a lot of noise. I mean a lot. They took it back to Grizzly and Grizzly said that that was normal. I would have returned the drill press and if they all were that noisy, I would look elsewhere. Dan |
Grizzly Tools
On Sat, 9 May 2009 08:36:28 -0700 (PDT), "
wrote: On May 9, 2:51*am, Rob wrote: Who could say no to Grizzly Tools? I have some friends that have a Grizzley Drill Press. The motor make a lot of noise. I mean a lot. They took it back to Grizzly and Grizzly said that that was normal. I would have returned the drill press and if they all were that noisy, I would look elsewhere. Dan Is it a variable speed? If so...they can indeed be noisy from the git go. Gunner "Somewhere a True Believer is training to kill you. He is training with minimum food or water,in austere conditions, day and night. The only thing clean on him is his weapon. He doesn't worry about what workout to do--- his rucksack weighs what it weighs, and he runs until the enemy stops chasing him. The True Believer doesn't care 'how hard it is'; he knows he either wins or he dies. He doesn't go home at 1700; he is home. He knows only the 'Cause.' Now, who wants to quit?" NCOIC of the Special Forces Assessment and Selection Course in a welcome speech to new SF candidates |
Grizzly Tools
On May 9, 11:17*pm, Gunner Asch wrote:
Is it a variable speed? If so...they can indeed be noisy from the git go. Gunner No. It is an ordinary single phase motor with very noisy bearings. It makes a lot of noise when there is no belt connected to the motor. A supplier like MSC would have replaced the motor or replaced the whole drill press. They made a mistake in asking Grizzly if the noise was normal. They should have told Grizzly they wanted to exchange the drill press because the bearings were bad. Dan |
Grizzly Tools
On Sat, 9 May 2009 20:58:01 -0700 (PDT), "
wrote: On May 9, 11:17*pm, Gunner Asch wrote: Is it a variable speed? If so...they can indeed be noisy from the git go. Gunner No. It is an ordinary single phase motor with very noisy bearings. It makes a lot of noise when there is no belt connected to the motor. A supplier like MSC would have replaced the motor or replaced the whole drill press. They made a mistake in asking Grizzly if the noise was normal. They should have told Grizzly they wanted to exchange the drill press because the bearings were bad. Dan True indeed. Or they can simply bite the bullet and spend the $15 for new bearings of good quality. Gunner "Somewhere a True Believer is training to kill you. He is training with minimum food or water,in austere conditions, day and night. The only thing clean on him is his weapon. He doesn't worry about what workout to do--- his rucksack weighs what it weighs, and he runs until the enemy stops chasing him. The True Believer doesn't care 'how hard it is'; he knows he either wins or he dies. He doesn't go home at 1700; he is home. He knows only the 'Cause.' Now, who wants to quit?" NCOIC of the Special Forces Assessment and Selection Course in a welcome speech to new SF candidates |
Grizzly Tools
On May 10, 3:17*am, Gunner Asch wrote:
Or they can simply bite the bullet and spend the $15 for new bearings of good quality. Gunner If they are shielded instead of sealed you might be able to squirt a little oil or non-foaming chain lube in. jsw |
Grizzly Tools
On May 10, 5:41*am, "DoN. Nichols" wrote:
* * * * Of course -- it *could* really be the motor. *Take the belt off the motor and just let it run with no belt and see what it sounds like. If it is silent then, start adding belts and see when the noise returns. * * * * Enjoy, * * * * * * * * DoN. Not my drill press. It is noisy with no belt connected to the motor. And not a little noisy. If it were my drill press I would be pressing Grizzly to do something. And if they would not do anything, I would replace the bearings. Not that it will not drill holes, but I do not want to wear ear muffs every time I use a drill press. I think Grizzly imports tools and sells them without ever inspecting them. And depends on the customer to find out any problems. Okay if you are close to Grizzly, but not so good if you have to pay shipping to return a defective part and have to wait for a replacement. And not so good if Grizzly says everything is good when it is not. On the other hand, they do sell tools cheaper than companies that check tools before they sell them. Dan |
Grizzly Tools
On Sun, 10 May 2009 04:49:43 -0700 (PDT), "
wrote: On May 10, 5:41*am, "DoN. Nichols" wrote: * * * * Of course -- it *could* really be the motor. *Take the belt off the motor and just let it run with no belt and see what it sounds like. If it is silent then, start adding belts and see when the noise returns. * * * * Enjoy, * * * * * * * * DoN. Not my drill press. It is noisy with no belt connected to the motor. And not a little noisy. If it were my drill press I would be pressing Grizzly to do something. And if they would not do anything, I would replace the bearings. Not that it will not drill holes, but I do not want to wear ear muffs every time I use a drill press. I think Grizzly imports tools and sells them without ever inspecting them. And depends on the customer to find out any problems. Okay if you are close to Grizzly, but not so good if you have to pay shipping to return a defective part and have to wait for a replacement. And not so good if Grizzly says everything is good when it is not. On the other hand, they do sell tools cheaper than companies that check tools before they sell them. Dan My Grizzly story: I ordered a 50 ton press after reviewing the online photo and confirming the details from the downloadable user manual, which showed and described a two-stage pump. But the press arrived with a single-stage pump, which is real pain sometimes. I complained and they told me I could return it at my own expense. sigh 750 lb IIRC, and the crate wasn't up for a return trip. They claimed that two-stage pumps were no longer available, but that was nonsense because the HF versions had that plus air. So they were BSing and I vowed to never deal with them again. But then out of the blue a day or so later they called and offered $100 credit. I still wish I could have undone the deal practically and purchased what I intended. But at least they offered a fair compromise, so I've continued using them. Wayne |
Grizzly Tools
On Sun, 10 May 2009 00:17:28 -0700, the infamous Gunner Asch
scrawled the following: On Sat, 9 May 2009 20:58:01 -0700 (PDT), " wrote: On May 9, 11:17*pm, Gunner Asch wrote: Is it a variable speed? If so...they can indeed be noisy from the git go. Gunner No. It is an ordinary single phase motor with very noisy bearings. It makes a lot of noise when there is no belt connected to the motor. A supplier like MSC would have replaced the motor or replaced the whole drill press. They made a mistake in asking Grizzly if the noise was normal. They should have told Grizzly they wanted to exchange the drill press because the bearings were bad. Dan True indeed. Or they can simply bite the bullet and spend the $15 for new bearings of good quality. I got the Chinese one for $7.50. They wanted $27 for the SKF bearing and I wasn't interested. This for the idler on the DP I got from you two years ago. I should probably install that sometime, huh? sigh -- No matter how cynical you are, it is impossible to keep up. --Lily Tomlin |
Grizzly Tools
With Grizzly Tools, there is no middleman or distributor. Selling
their own product, instead of someone else’s, drastically reduced the average price of their items. Nobody beats its high quality, durability and low cost. Their own product? LOL... You mean their own rebranded product. Can't argue with much else. the G0521 drill press, except for difficult speed changes, is the best low cost drill press we've ever used. Self-reversing for rigid and multi-spindle tap processes and all. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
All times are GMT +1. The time now is 01:22 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter