|
Anyone Have a Delta 11-090
I'm looking to confirm a physical measurement from the machine that I can't
get from the manual, parts drawings, etc... Must have micrometer handy or be skilled in using a caliper when measuring a tubular / round part section. Any help would be greatly appreciated and potentially rewarded with a returned favor, etc. Thank you. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
Anyone Have a Delta 11-090
On Apr 21, 8:59*am, "Joe AutoDrill" wrote:
I'm looking to confirm a physical measurement from the machine that I can't get from the manual, parts drawings, etc... Must have micrometer handy or be skilled in using a caliper when measuring a tubular / round part section. Any help would be greatly appreciated and potentially rewarded with a returned favor, etc. Thank you. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills:http://www.AutoDrill.com Multiple Spindle Drills:http://www.Multi-Drill.com Flagship Site:http://www.Drill-N-Tap.com V8013-R Maybe. It would help if you gave a clue or two so that we wouldn't have to check all our machines for model numbers. I'm guessing that most people don't know them offhand, but I could be wrong. John Martin |
Anyone Have a Delta 11-090
I'm looking to confirm a physical measurement from the machine that I
can't get from the manual, parts drawings, etc... Must have micrometer handy or be skilled in using a caliper when measuring a tubular / round part section. Any help would be greatly appreciated and potentially rewarded with a returned favor, etc. Maybe. It would help if you gave a clue or two so that we wouldn't have to check all our machines for model numbers. I'm guessing that most people don't know them offhand, but I could be wrong. John Martin What types of clues might be useful? This might help I guess: Make: Delta Model: 11-090 Drill Press - Radial arm type I should have said it was a DP. Sorry 'bout that. If a different clue might be useful, please let me know. Thanks for any help possible. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
UPDATE - Anyone Have a Delta 11-090 DRILL PRESS (Radial Arm Type)
Should have mentioned it was a smaller radial arm drill press... Sorry for
the lack of info! Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
Anyone Have a Delta 11-090
"Joe AutoDrill" wrote in message ... I'm looking to confirm a physical measurement from the machine that I can't get from the manual, parts drawings, etc... Must have micrometer handy or be skilled in using a caliper when measuring a tubular / round part section. Any help would be greatly appreciated and potentially rewarded with a returned favor, etc. Maybe. It would help if you gave a clue or two so that we wouldn't have to check all our machines for model numbers. I'm guessing that most people don't know them offhand, but I could be wrong. John Martin What types of clues might be useful? This might help I guess: Make: Delta Model: 11-090 Drill Press - Radial arm type That's a good clue. Now know I do not need to run out in the shop and start measuring everything on my Delta radial arm saw. I should have said it was a DP. Sorry 'bout that. If a different clue might be useful, please let me know. Thanks for any help possible. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
UPDATE - Anyone Have a Delta 11-090 DRILL PRESS (Radial Arm Type)
On Apr 21, 1:18*pm, "Joe AutoDrill" wrote:
Should have mentioned it was a smaller radial arm drill press... *Sorry for the lack of info! Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills:http://www.AutoDrill.com Multiple Spindle Drills:http://www.Multi-Drill.com Flagship Site:http://www.Drill-N-Tap.com V8013-R That'll do it, Joe. None here, though. John Martin |
Anyone Have a Delta 11-090
"DanG" wrote in message ... I have a Delta benchtop radial drill in the shop. I will try to remember to check the model number today, Wed. If it is right, what part do you need to dimension? Dan, The diameter of the non-rotating portion of the quill. I've got a drawing / photos showing the location if it turns out to be the right machine. Thank you. -- Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
Anyone Have a Delta 11-090
Joe, mine is not right. I have an 11-280 if I remember the number
correctly. If you think it would cross over, let me know. -- ______________________________ Keep the whole world singing . . . . DanG (remove the sevens) "Joe AutoDrill" wrote in message ... "DanG" wrote in message ... I have a Delta benchtop radial drill in the shop. I will try to remember to check the model number today, Wed. If it is right, what part do you need to dimension? Dan, The diameter of the non-rotating portion of the quill. I've got a drawing / photos showing the location if it turns out to be the right machine. Thank you. -- Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
Anyone Have a Delta 11-090
"DanG" wrote in message
... Joe, mine is not right. I have an 11-280 if I remember the number correctly. If you think it would cross over, let me know. Dan, No worries and thank you. All set at this point unless you want to provide the measurements for the historical record only so when someone else comes in with an 11-280, I'll impress them with the fact that I've got the numbers. :) -- Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R |
| All times are GMT +1. The time now is 11:24 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter