Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 347
Default Pinging Gunner

Hey Gunner, how are you doing? Hope your recovery is fast and complete!
Are you starting to get more active? When can you go back to work?

God bless,
Ivan Vegvary

  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,502
Default Pinging Gunner

On Wed, 04 Feb 2009 15:04:41 GMT, "Ivan Vegvary"
wrote:

Hey Gunner, how are you doing? Hope your recovery is fast and complete!
Are you starting to get more active? When can you go back to work?

God bless,
Ivan Vegvary


Thank you for asking!

Im doing well enough I guess. I spent most of yesterday in Bakersfield
with the ex, shopping for the necessities, and visited the kids for a
short bit. First time they had seen me since the surgery..the
granddaughter was most concerned. G

I pushed a shopping cart (tenderly) all around Walmart with 60 lbs of
cat and dog kibble...which exhausted me. I went back to the truck and
napped for a few hours while she finished shopping, waiting for
perscriptions etc.
Im off to Los Angeles this morning..a 150 mile ride Im really not
looking forwards to, Tommorow morning, they will be removing my
staples..which I AM looking forwards to. A couple clients have asked I
stop by so they can "check on me..and maybe look at a machine?", though
Ive prewarned em...I may stand by and direct their workers in any
repairs. Crom knows I need the service hours... IE money.. When you are
independant...you cannot afford to say NO to too many people, too many
times.

They say I can probably start to drive at 4 weeks, and back to limited
duty at 6 weeks, it being a matter of how well that busted sternum is
healing..and all the ribs that cracked as well.

Its been most interesting having 4 large dogs who are most concerned
about Daddy and want to crawl into his lap to give him lovin, or launch
themselves from his chest....muffled scream....This morning I woke up
with one across my chest, and one laying on top of my right leg, on all
the staples. I had to convince them to gently...get off. More or less
sucesfuly...Only got two staples to bleeding. Its hard to shout and
bash at them when they are only trying to show love, without hurting the
relationship

Chuckle....its been a learning experience for all. Yesterday I didnt
think and grabbed a 40lb bag of kibble from the shopping cart, one
handed as usual, while opening the back of the truck....and went right
to my knees in a bright white light filled with fireworks and stars and
stuff. When it cleared..the wife was standing there, taping her foot
and asking..."going to do that again?"...I managed a whimpered "no" and
she tossed everything into the truck while shaking her head at stupid
men who should know better.

Sigh...Ive never been one to favor ills or injury...this is a hard one
to ignore......

Thanks for asking

Gunner

"Not so old as to need virgins to excite him,
nor old enough to have the patience to teach one."
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,355
Default Pinging Gunner

I skipped the meeting, but the Memos showed that Gunner Asch
wrote on Wed, 04 Feb 2009 08:49:06 -0800
in rec.crafts.metalworking :


Sigh...Ive never been one to favor ills or injury...this is a hard one
to ignore......


I had an SO like that: you treated her like a Lady - or Else!

Thanks for asking


My wisecrack remains" be grateful for pain, it proves you're
alive." Although sometimes, I could just as soon suffer from a lack
of existential clarity on the subject.
--
pyotr filipivich
We will drink no whiskey before its nine.
It's eight fifty eight. Close enough!
  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 412
Default Pinging Gunner


"Gunner Asch" wrote in message
...
On Wed, 04 Feb 2009 15:04:41 GMT, "Ivan Vegvary"
wrote:

Hey Gunner, how are you doing? Hope your recovery is fast and complete!
Are you starting to get more active? When can you go back to work?

God bless,
Ivan Vegvary


Thank you for asking!

Im doing well enough I guess. I spent most of yesterday in Bakersfield
with the ex, shopping for the necessities, and visited the kids for a
short bit. First time they had seen me since the surgery..the
granddaughter was most concerned. G

I pushed a shopping cart (tenderly) all around Walmart with 60 lbs of
cat and dog kibble...which exhausted me. I went back to the truck and
napped for a few hours while she finished shopping, waiting for
perscriptions etc.
Im off to Los Angeles this morning..a 150 mile ride Im really not
looking forwards to, Tommorow morning, they will be removing my
staples..which I AM looking forwards to. A couple clients have asked I
stop by so they can "check on me..and maybe look at a machine?", though
Ive prewarned em...I may stand by and direct their workers in any
repairs. Crom knows I need the service hours... IE money.. When you are
independant...you cannot afford to say NO to too many people, too many
times.

They say I can probably start to drive at 4 weeks, and back to limited
duty at 6 weeks, it being a matter of how well that busted sternum is
healing..and all the ribs that cracked as well.

Its been most interesting having 4 large dogs who are most concerned
about Daddy and want to crawl into his lap to give him lovin, or launch
themselves from his chest....muffled scream....This morning I woke up
with one across my chest, and one laying on top of my right leg, on all
the staples. I had to convince them to gently...get off. More or less
sucesfuly...Only got two staples to bleeding. Its hard to shout and
bash at them when they are only trying to show love, without hurting the
relationship

Chuckle....its been a learning experience for all. Yesterday I didnt
think and grabbed a 40lb bag of kibble from the shopping cart, one
handed as usual, while opening the back of the truck....and went right
to my knees in a bright white light filled with fireworks and stars and
stuff. When it cleared..the wife was standing there, taping her foot
and asking..."going to do that again?"...I managed a whimpered "no" and
she tossed everything into the truck while shaking her head at stupid
men who should know better.

Sigh...Ive never been one to favor ills or injury...this is a hard one
to ignore......

Thanks for asking

Gunner

"Not so old as to need virgins to excite him,
nor old enough to have the patience to teach one."


I kinda' hadta' slow down as my feet and legs wouldn't let me stay upright
for 12 hours a day anymore, mostly due to diabetes and extra weight. I
hired a "Resource Manager" that is a bit manic. In his position it's a
blessing. He's also named Tom, so a good portion of my phone calls get
directed his way and he does his best to field them. I also hired a
crackerjack machinist, Tim. He's a true artist and he's fast and has a
great sense of humor. Brian handles all the repair jobs and guides
production and training. Roger does a great job interfacing everybody, sets
standards and directs new project construction. At one time I had to do all
that and more. In a nutshell, I've reproduced myself to the point that I
only have to dip my fingers in where I want to get dirty. I do most of the
design work in Solidworks, I iron out issues from everybody else and in
general, direct the action.

So, I think you need to start reproducing yourself before you take the
"toe-tag" retirement option. Find a couple of people that can do the job
and direct them. The right people will more than pay their way and you can
coast a bit yet still be hands-on. Three people can do four times the work!


  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,224
Default Pinging Gunner

On Wed, 04 Feb 2009 08:49:06 -0800, Gunner Asch
wrote:

On Wed, 04 Feb 2009 15:04:41 GMT, "Ivan Vegvary"
wrote:

Hey Gunner, how are you doing? Hope your recovery is fast and complete!
Are you starting to get more active? When can you go back to work?

God bless,
Ivan Vegvary


Thank you for asking!


They say I can probably start to drive at 4 weeks, and back to limited
duty at 6 weeks, it being a matter of how well that busted sternum is
healing..and all the ribs that cracked as well.


Here's hoping for the best

Its been most interesting having 4 large dogs who are most concerned
about Daddy and want to crawl into his lap to give him lovin, or launch
themselves from his chest....muffled scream....


Somewhere I have pictures of SWMBO bedded down on the chesterfield
with an opened out carton over her tummy when I brought her home after
her hysterectomy - incision from navel to pubic bone - to discourage
12 pound Bichon from doing her "Top Dog" curl up on the tummy act.


Chuckle....its been a learning experience for all. Yesterday I didnt
think and grabbed a 40lb bag of kibble from the shopping cart, one
handed as usual, while opening the back of the truck....and went right
to my knees in a bright white light filled with fireworks and stars and
stuff.

Acquaintance was helping his son install a clothes line pole a year
after his surgery and volunteered to go get a couple bags of
sack-crete. When he returned, the boys were in having a beer, so Dad
tried to get the bags out of the trunk - big mistake!


Sigh...Ive never been one to favor ills or injury...this is a hard one
to ignore......

You take care and behave yourself!
Gerry :-)}
London, Canada


  #6   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 67
Default Pinging Gunner

Good Luck!
BobH
  #7   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 719
Default Pinging Gunner


"Buerste" wrote in message
...

"Gunner Asch" wrote in message
...
On Wed, 04 Feb 2009 15:04:41 GMT, "Ivan Vegvary"
wrote:

So, I think you need to start reproducing yourself before you take the
"toe-tag" retirement option.


Why would you clone a welfare queen Tom?


JC


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PINGING Gunner [email protected] Metalworking 4 January 18th 06 02:57 PM
Pinging Gunner JB Metalworking 1 December 26th 05 06:49 AM
Pinging Gunner JB Metalworking 1 December 5th 05 11:10 PM
pinging gunner doo Metalworking 1 January 2nd 05 02:48 AM
OT-Pinging Gunner Jeff Wisnia Metalworking 5 September 9th 04 05:53 PM


All times are GMT +1. The time now is 06:35 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"