Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
I have this machine available for sale.
Hitachi-Seiki VA35 Vertical Machining Center 3 Axis CNC Fanuc 6M Model B 18 Position Automatic Tool Changer Travel 22" X 14" X 16" PHOTOS WERE TAKEN IN THE PLANT. MACHINE HAS NOT BEEN CLEANED OR PAINTED, THIS IS THE NORMAL APPEARANCE IN ITS WORKING ENVIRONMENT. GUARDS HAVE BEEN REMOVED AND SOME COVERS AS WELL AS DOOR LEFT OPEN TO SHOW MACHINE CONDITION. MACHINE IS ON SHOP FLOOR AND UNDER POWER AND IS IN WORKING ORDER. THIS IS A MEDIUM HEIGHT ENCLOSURE, MODERN MACHINE TOOL THAT WILL MAKE A GREAT ADDITION TO ANY SHOP, GARAGE, MACHINIST REQUIRING A FLEXIBLE VMC AT A VERY AFFORDABLE PRICE. THE FANUC 6MB CONTROL IS IN VERY GOOD CONDITION. GOOD CHANCE TO BUY AN INDUSTRIAL MACHINE TOOL FOR HOBBY MACHINE PRICE Table Working Area 40” x 14” Work Capacity 1,100 lbs Stroke X Axis 22” Y Axis 14” Z Axis 16” End of Z Axis Stoke To Table Top 5.5” Approx. Spindle Nose CAT 40 Spindle RPM Range 60-6000 Spindle Speed Change Step-less / S – 4 digit Spindle Motor 7.5HP AC Spindle Chiller Feed Least Increment .001mm .0001 Inch Max. Feed 3,600mm/min 140 IPM Rapid Traverse 13,000mm/min 500 IPM ATC Number of tools 18 Shank CAT 40 Max. Tool Diameter 3.75” Max. Tool Length 10” Max. Tool Weight 22 lbs. Larger tools can be used in the spindle, just not loaded by ATC Automatic Lubrication System Flood Type Coolant M08/M09 Program Upload/Download MDI Input RS232 Upload/Download Tape Reader Power 200-220V, 50/60 Hz Weight 8,800 lbs. Manuals included in sale: Hitachi-Seiki VA-35 Programming Manual Hitachi-Seiki VA-35 Operator's Manual Hitachi-Seiki VA-35 Parts Manual Hitachi-Seiki VA-35 Wiring Schematics Fanuc 6M Model B Programming Manual Fanuc 6M model B Maintenance Manual $6000 OBO Gunner 805-732-5308 |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
Looks like a fun machine and the price is reasonable.
i |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
"Ignoramus1711" wrote in message ... Looks like a fun machine and the price is reasonable. Until you have to replace a board. Tulip would be your friend on this one. JC |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
"Tulip" Who dat?
Bob Swinney "John R. Carroll" wrote in message ... "Ignoramus1711" wrote in message ... Looks like a fun machine and the price is reasonable. Until you have to replace a board. Tulip would be your friend on this one. JC |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
http://www.tulipmemory.com/index.html
"Robert Swinney" wrote in message ... "Tulip" Who dat? Bob Swinney "John R. Carroll" wrote in message ... "Ignoramus1711" wrote in message ... Looks like a fun machine and the price is reasonable. Until you have to replace a board. Tulip would be your friend on this one. JC |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
Here is another useful resource for obsoleted Fanuc controls.
http://www.omegaebr.com/ JC "Robert Swinney" wrote in message ... "Tulip" Who dat? Bob Swinney "John R. Carroll" wrote in message ... "Ignoramus1711" wrote in message ... Looks like a fun machine and the price is reasonable. Until you have to replace a board. Tulip would be your friend on this one. JC |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
"John R. Carroll" wrote:
Here is another useful resource for obsoleted Fanuc controls. http://www.omegaebr.com/ What models are obsoleted? I've got Otc OM's 6M 16 18 currently. Wes -- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
"John R. Carroll" wrote in message ... "Ignoramus1711" wrote in message ... Looks like a fun machine and the price is reasonable. Until you have to replace a board. Tulip would be your friend on this one. JC Why bother, when a board goes bad, replace the control with an EMC2 control for less than $500 and be done with it. Mach 3 is good for stepper systems, with EMC2 you can replace servo controls for less than $500 complete (computer, operating system, cnc software, servo board, interface board, I/O board, breakout boards, ribbon cables, etc). It's nice to have a control system with the most expensive board costing $199 to replace. RogerN |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
On Thu, 22 Jan 2009 10:52:19 -0800, Gunner
wrote: I have this machine available for sale. Hitachi-Seiki VA35 (Snip) Program Upload/Download MDI Input RS232 Upload/Download Tape Reader Two things, not that I'm buying, but this just popped into my head - what kind of "Tape Reader"? Is this paper tape - Baudot or ASCII? And does it come with an ASR-33 sitting off to one side for punching and proofing new tapes?? Or are we talking Compact Cassette, or 1/2" 9-track BlackWatch data tape, or Colorado drive, or... There are too many ancient formats out there that use "tape". Look at Video Archives - they might have thousands of hours of archival footage on 2" AMPEX videotape, but it is worthless if there are no operable machines left to play it back with... Power 200-220V, 50/60 Hz 1Ph or 3Ph? -- Bruce -- |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
On Thu, 22 Jan 2009 23:35:19 -0800, Bruce L. Bergman
wrote: On Thu, 22 Jan 2009 10:52:19 -0800, Gunner wrote: I have this machine available for sale. Hitachi-Seiki VA35 (Snip) Program Upload/Download MDI Input RS232 Upload/Download Tape Reader Two things, not that I'm buying, but this just popped into my head - what kind of "Tape Reader"? Is this paper tape - Baudot or ASCII? And does it come with an ASR-33 sitting off to one side for punching and proofing new tapes?? Paper tape of course. Tape punch optional..they are available, though with RS232...why bother? Or are we talking Compact Cassette, or 1/2" 9-track BlackWatch data tape, or Colorado drive, or... There are too many ancient formats out there that use "tape". Look at Video Archives - they might have thousands of hours of archival footage on 2" AMPEX videotape, but it is worthless if there are no operable machines left to play it back with... Power 200-220V, 50/60 Hz 1Ph or 3Ph? -- Bruce -- 3ph of course. With a 7.5hp spindle...its not likely to be 1ph Gunner |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
On 2009-01-23, Bruce L Bergman wrote:
On Thu, 22 Jan 2009 10:52:19 -0800, Gunner wrote: I have this machine available for sale. [ ... ] RS232 Upload/Download Tape Reader Two things, not that I'm buying, but this just popped into my head - what kind of "Tape Reader"? Is this paper tape - Baudot or ASCII? Almost certainly 8-level punched tape -- in ASCII not Baudot. And does it come with an ASR-33 sitting off to one side for punching and proofing new tapes?? Usually, there was a computer in the office with a paper tape punch to feed the machines on the shop floor. :-) Or are we talking Compact Cassette, or 1/2" 9-track BlackWatch data tape, or Colorado drive, or... Nope! There are too many ancient formats out there that use "tape". But there is only one traditional for CNC machines. Look at Video Archives - they might have thousands of hours of archival footage on 2" AMPEX videotape, but it is worthless if there are no operable machines left to play it back with... Well ... I've got both 8-level punches and readers. :-) Enjoy, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
From a friend of mine: "Sounds like a good deal, fanuc 6m control - good,
does it come with rigid tapping? Box ways or linear? What year? Wired for 4th axis?" Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R "Gunner" wrote in message ... I have this machine available for sale. Hitachi-Seiki VA35 Vertical Machining Center 3 Axis CNC Fanuc 6M Model B 18 Position Automatic Tool Changer Travel 22" X 14" X 16" PHOTOS WERE TAKEN IN THE PLANT. MACHINE HAS NOT BEEN CLEANED OR PAINTED, THIS IS THE NORMAL APPEARANCE IN ITS WORKING ENVIRONMENT. GUARDS HAVE BEEN REMOVED AND SOME COVERS AS WELL AS DOOR LEFT OPEN TO SHOW MACHINE CONDITION. MACHINE IS ON SHOP FLOOR AND UNDER POWER AND IS IN WORKING ORDER. THIS IS A MEDIUM HEIGHT ENCLOSURE, MODERN MACHINE TOOL THAT WILL MAKE A GREAT ADDITION TO ANY SHOP, GARAGE, MACHINIST REQUIRING A FLEXIBLE VMC AT A VERY AFFORDABLE PRICE. THE FANUC 6MB CONTROL IS IN VERY GOOD CONDITION. GOOD CHANCE TO BUY AN INDUSTRIAL MACHINE TOOL FOR HOBBY MACHINE PRICE Table Working Area 40" x 14" Work Capacity 1,100 lbs Stroke X Axis 22" Y Axis 14" Z Axis 16" End of Z Axis Stoke To Table Top 5.5" Approx. Spindle Nose CAT 40 Spindle RPM Range 60-6000 Spindle Speed Change Step-less / S - 4 digit Spindle Motor 7.5HP AC Spindle Chiller Feed Least Increment .001mm .0001 Inch Max. Feed 3,600mm/min 140 IPM Rapid Traverse 13,000mm/min 500 IPM ATC Number of tools 18 Shank CAT 40 Max. Tool Diameter 3.75" Max. Tool Length 10" Max. Tool Weight 22 lbs. Larger tools can be used in the spindle, just not loaded by ATC Automatic Lubrication System Flood Type Coolant M08/M09 Program Upload/Download MDI Input RS232 Upload/Download Tape Reader Power 200-220V, 50/60 Hz Weight 8,800 lbs. Manuals included in sale: Hitachi-Seiki VA-35 Programming Manual Hitachi-Seiki VA-35 Operator's Manual Hitachi-Seiki VA-35 Parts Manual Hitachi-Seiki VA-35 Wiring Schematics Fanuc 6M Model B Programming Manual Fanuc 6M model B Maintenance Manual $6000 OBO Gunner 805-732-5308 |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
CNC Mill available- So.California
On Fri, 23 Jan 2009 09:33:06 -0500, "Joe AutoDrill"
wrote: From a friend of mine: "Sounds like a good deal, fanuc 6m control - good, does it come with rigid tapping? Box ways or linear? What year? Wired for 4th axis?" No idea, but Ill ask the seller. Gunner Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Flagship Site: http://www.Drill-N-Tap.com V8013-R "Gunner" wrote in message .. . I have this machine available for sale. Hitachi-Seiki VA35 Vertical Machining Center 3 Axis CNC Fanuc 6M Model B 18 Position Automatic Tool Changer Travel 22" X 14" X 16" PHOTOS WERE TAKEN IN THE PLANT. MACHINE HAS NOT BEEN CLEANED OR PAINTED, THIS IS THE NORMAL APPEARANCE IN ITS WORKING ENVIRONMENT. GUARDS HAVE BEEN REMOVED AND SOME COVERS AS WELL AS DOOR LEFT OPEN TO SHOW MACHINE CONDITION. MACHINE IS ON SHOP FLOOR AND UNDER POWER AND IS IN WORKING ORDER. THIS IS A MEDIUM HEIGHT ENCLOSURE, MODERN MACHINE TOOL THAT WILL MAKE A GREAT ADDITION TO ANY SHOP, GARAGE, MACHINIST REQUIRING A FLEXIBLE VMC AT A VERY AFFORDABLE PRICE. THE FANUC 6MB CONTROL IS IN VERY GOOD CONDITION. GOOD CHANCE TO BUY AN INDUSTRIAL MACHINE TOOL FOR HOBBY MACHINE PRICE Table Working Area 40" x 14" Work Capacity 1,100 lbs Stroke X Axis 22" Y Axis 14" Z Axis 16" End of Z Axis Stoke To Table Top 5.5" Approx. Spindle Nose CAT 40 Spindle RPM Range 60-6000 Spindle Speed Change Step-less / S - 4 digit Spindle Motor 7.5HP AC Spindle Chiller Feed Least Increment .001mm .0001 Inch Max. Feed 3,600mm/min 140 IPM Rapid Traverse 13,000mm/min 500 IPM ATC Number of tools 18 Shank CAT 40 Max. Tool Diameter 3.75" Max. Tool Length 10" Max. Tool Weight 22 lbs. Larger tools can be used in the spindle, just not loaded by ATC Automatic Lubrication System Flood Type Coolant M08/M09 Program Upload/Download MDI Input RS232 Upload/Download Tape Reader Power 200-220V, 50/60 Hz Weight 8,800 lbs. Manuals included in sale: Hitachi-Seiki VA-35 Programming Manual Hitachi-Seiki VA-35 Operator's Manual Hitachi-Seiki VA-35 Parts Manual Hitachi-Seiki VA-35 Wiring Schematics Fanuc 6M Model B Programming Manual Fanuc 6M model B Maintenance Manual $6000 OBO Gunner 805-732-5308 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|