 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Connectors for Jenix DROs sought
I put a Jenix DRO on my Millrite vertical mill. I would like to add a
Z-axis switch, choosing between the knee vertical motion and quill motion. The problem is that I have not been able to figure out the make and model of the 6-pin connectors used to connect linear scale to readout head. I don't think it matters, but the scales are Jenix type JSN5L. The distributor doesn't know, and an email to Jenix in Korea was not answered. Nor does google give the answer, although it does mention Sargon connector adapters. Any ideas? Joe Gwinn |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Comments on the reliability of Newall DROs | Metalworking | |||
| Pan Connectors - Quality Item Sought | UK diy | |||
| DROs, Coordinate Systems and Mills | Metalworking | |||
| Chinese DROs: Accuracy? | Metalworking | |||
| New Source for a "NICE" and cheap DROs | Metalworking | |||
Threaded Mode
