Please help identify a tool?
 

Does anyone know what this tool is called and what's it for? It's the
first two pics on my Photobucket site, just click on the link below.
Castings have DA$ 103, DAG 147CF & DAG 148. I'm guessing that it might
be a jig for drill bit sharpening.
Thank
Hank wd5jfr
http://s97.photobucket.com/albums/l237/wd5jfr/

Please help identify a tool?
 

Your guess is correct. It was sold by Rockwell, later by Delta and
instructions for use can be downloaded at the excellent owwm.com.
I have one and it works well.

"Henry Kolesnik" wrote in message
...

Does anyone know what this tool is called and what's it for? It's the
first two pics on my Photobucket site, just click on the link below.
Castings have DA$ 103, DAG 147CF & DAG 148. I'm guessing that it might be
a jig for drill bit sharpening.
Thank
Hank wd5jfr
http://s97.photobucket.com/albums/l237/wd5jfr/

Please help identify a tool?
 

Henry Kolesnik wrote:

Does anyone know what this tool is called and what's it for?

It is a Delta 1296 drill grinding attachment. Here is the manual,
courtesy of the OWWM site:

http://www.owwm.com/pubs/1141/1503.pdf

Kevin Gallimore


----== Posted via Pronews.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.pronews.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= - Total Privacy via Encryption =---

Please help identify a tool?
 

This fixture/accessory looks similar to one I bought a while ago. It's in a
box somewhere, so I don't have access to it right now.

Your model appears to have more knurled adjusting knobs than the one I have,
and to me, yours appears to be made to attach to a particular machine.

Mine looks more like a type that would mount to a typical bench grinder.

They both look to be about the same overall size.

The manufacturer for mine is Kalamazoo Industries, and the descriptive name
used for it is - drill grinding attachment.

WB
..........
metalworking projects
www.kwagmire.com/metal_proj.html


"Henry Kolesnik" wrote in message
...

Does anyone know what this tool is called and what's it for? It's the
first two pics on my Photobucket site, just click on the link below.
Castings have DA$ 103, DAG 147CF & DAG 148. I'm guessing that it might be
a jig for drill bit sharpening.
Thank
Hank wd5jfr
http://s97.photobucket.com/albums/l237/wd5jfr/

Please help identify a tool?
 

"Henry Kolesnik" wrote in message
...

Does anyone know what this tool is called and what's it for? It's the
first two pics on my Photobucket site, just click on the link below.
Castings have DA$ 103, DAG 147CF & DAG 148. I'm guessing that it might be
a jig for drill bit sharpening.
Thank
Hank wd5jfr
http://s97.photobucket.com/albums/l237/wd5jfr/
Others have much better idea about your tool but I cannot help but comment
on the rest of your album. It brings back memories!
BTW I think the German piece of equipment is form WW2, 1941 manufacture if I
am correct. It is not one I am familiar with first hand (unlike the EK10s or
EL10s). Does it have the RV series of "acorn" valves? The Germans sure knew
how to build this stuff...

--
Michael Koblic,
Campbell River, BC

Please help identify a tool?
 

Michael
The German WWII Rx/Tx is a missing all the tubes as I recall. I've been
told be others that the German VHF technology was way ahead of ours and
we copied lots of it.
Hank wd5jfr
"Michael Koblic" wrote in message
...

"Henry Kolesnik" wrote in message
...

Does anyone know what this tool is called and what's it for? It's
the first two pics on my Photobucket site, just click on the link
below.
Castings have DA$ 103, DAG 147CF & DAG 148. I'm guessing that it
might be a jig for drill bit sharpening.
Thank
Hank wd5jfr
http://s97.photobucket.com/albums/l237/wd5jfr/
Others have much better idea about your tool but I cannot help but
comment on the rest of your album. It brings back memories!
BTW I think the German piece of equipment is form WW2, 1941
manufacture if I am correct. It is not one I am familiar with first
hand (unlike the EK10s or EL10s). Does it have the RV series of
"acorn" valves? The Germans sure knew how to build this stuff...

--
Michael Koblic,
Campbell River, BC

Please help identify a tool?
 

Hey Guys
Thanks for all the help in identifying the drill sharpening jig.
So I posted another query!
Hank wd5jfr
"Wild_Bill" wrote in message
...
This fixture/accessory looks similar to one I bought a while ago. It's
in a box somewhere, so I don't have access to it right now.

Your model appears to have more knurled adjusting knobs than the one I
have, and to me, yours appears to be made to attach to a particular
machine.

Mine looks more like a type that would mount to a typical bench
grinder.

They both look to be about the same overall size.

The manufacturer for mine is Kalamazoo Industries, and the descriptive
name used for it is - drill grinding attachment.

WB
.........
metalworking projects
www.kwagmire.com/metal_proj.html


"Henry Kolesnik" wrote in message
...

Does anyone know what this tool is called and what's it for? It's
the first two pics on my Photobucket site, just click on the link
below.
Castings have DA$ 103, DAG 147CF & DAG 148. I'm guessing that it
might be a jig for drill bit sharpening.
Thank
Hank wd5jfr
http://s97.photobucket.com/albums/l237/wd5jfr/

Please help identify a tool?
 

"Henry Kolesnik" wrote in message
...
Michael
The German WWII Rx/Tx is a missing all the tubes as I recall. I've been
told be others that the German VHF technology was way ahead of ours and we
copied lots of it.

The tube sockets were typical and unlike anything I have seen elsewhere.
they formed a complete cage around the whole tube with the pins sticking out
*sideways* but with one connection (anode AFAIK) at the top of the glass.

Those were the good days...

Please help identify a tool?
 

On Nov 9, 2:11*am, "Michael Koblic" wrote:
...
Those were the good days...

I once worked for a German who talked like that.

And hummed the Horst Wessel song.

Please help identify a tool?
 

On Sat, 8 Nov 2008 23:11:15 -0800, "Michael Koblic"
wrote:


"Henry Kolesnik" wrote in message
.. .
Michael
The German WWII Rx/Tx is a missing all the tubes as I recall. I've been
told be others that the German VHF technology was way ahead of ours and we
copied lots of it.

The tube sockets were typical and unlike anything I have seen elsewhere.
they formed a complete cage around the whole tube with the pins sticking out
*sideways* but with one connection (anode AFAIK) at the top of the glass.


Acorn tubes?
Those were the good days...

Gerry :-)}
London, Canada

Please help identify a tool?
 

"Jim Wilkins" wrote in message
...
On Nov 9, 2:11 am, "Michael Koblic" wrote:
...
Those were the good days...

I once worked for a German who talked like that.

And hummed the Horst Wessel song.

***So I take it you will not be running for president in future...

Please help identify a tool?
 

"Gerald Miller" wrote in message
...

Acorn tubes?

http://www.elektroda.pl/rtvforum/topic838760.html

A fine piece of technology, political affiliations notwithstanding (just
like the VW bug)

Please help identify a tool?
 

Michael Koblic wrote:
"Gerald Miller" wrote in message
...


Acorn tubes?


http://www.elektroda.pl/rtvforum/topic838760.html

A fine piece of technology, political affiliations notwithstanding (just
like the VW bug)


But that is not an Acorn tube. I have one sitting on my mantle.
...lew...

Please help identify a tool?
 

"Lew Hartswick" wrote in message
m...
Michael Koblic wrote:
"Gerald Miller" wrote in message
...


Acorn tubes?


http://www.elektroda.pl/rtvforum/topic838760.html

A fine piece of technology, political affiliations notwithstanding (just
like the VW bug)
But that is not an Acorn tube. I have one sitting on my mantle.
...lew...

If it looks like an acorn, walks like an acorn...:-). Anyway, I said
"acorn", not Acorn. There are other things it looks like but acorn came to
mind as the most polite.

Please help identify a tool?
 

http://www.antiquewireless.org/otb/acorntube.htm
When I think of acorn tubes - I think - baseless, pinless, all glass.

I want to say I have a few in the shop or did. Klystrons yes.
Other RF and such naturally.

Martin

Michael Koblic wrote:
"Gerald Miller" wrote in message
...

Acorn tubes?

http://www.elektroda.pl/rtvforum/topic838760.html

A fine piece of technology, political affiliations notwithstanding (just
like the VW bug)