Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Anyone built an Instant Hot Water system?
Hi,
I have two separate runs of hot water in my house and to use two of these commercial units would cost almost 500-bucks. http://www.lowes.com/lowes/lkn?actio...800&lpage=none I am thinking one of these and a couple of temp sensors for on and off. http://www.harborfreight.com/cpi/cta...temnumber=1479 I have emailed HF asking for the max operating pressure as my well pump maxes out at 50 psi. Practical comments and suggestions please? Dave |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Instant, I mean instant, hot water | Home Repair | |||
Instant Hot Water: Installing a Re-circulating System | Home Repair | |||
instant hot water dispenser | Home Repair | |||
Instant hot water? | Home Repair | |||
hot water recirculator, instant hot water but not a water heating unit, saves water, gas, time, money | Home Repair |