Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Referral to excellent thread on acetylene behavior
There is a thread on sci.engr.joining.welding that RCM'ers should read.
The subject is the behavior of acetylene under pressure & the significance of the magic 15 psi. Peter Fairbrother explains it all. The thread is titled "Splitter on Acetylene tank", the OP is "Ben", dated 9/6/2008. Bob -- Nota for President |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Good Referral Site!! | Home Ownership | |||
Great Referral Site!! | Home Repair | |||
Laser engraver referral, please | Woodturning | |||
Another 4-start thread question - 1/4" internal thread | Metalworking | |||
Questions regarding thread diameter and pitch for special design case with limited thread length | Metalworking |