 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Tolerance on 4mm hot rolled mild steel plate?
Does anyone know what a normal tolerance would be on 4mm hot rolled mild
steel plate?. TIA Dave |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
Tolerance on 4mm hot rolled mild steel plate?
On 2008-06-23, David Billington wrote:
Does anyone know what a normal tolerance would be on 4mm hot rolled mild steel plate?. No direct experience with hot rolled plate in metric sizes, so things may differ from where I am anyway. But Hot rolled bar stock at least tends to be significantly oversized, so it can be turned to the nominal diameter while cleaning up the scale. I would expect something like that for the plate as well -- unless UK practices are different. Good Luck, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Welding SS to mild steel | UK diy | |||
| rebar - why is mild steel okay? | UK diy | |||
| mild steel question | Metalworking | |||
| cutting out 4" circles of 1/8" mild steel plate | Metalworking | |||
| Newbie Question; Cold Rolled Steel bar | Metalworking | |||
Linear Mode
