HTS-2000 any good?
 

Is this stuff any good? I want to fabricate some small AL tubes in the
from of a cube?

http://www.aluminumrepair.com/index.asp
I'm guessing a zinc alloy, but is it good?

Karl

HTS-2000 any good?
 

On May 20, 10:33 am, "
wrote:
Is this stuff any good? I want to fabricate some small AL tubes in the
from of a cube?

http://www.aluminumrepair.com/index.asp
I'm guessing a zinc alloy, but is it good?

Karl


And, is it better than the mythical 'alumalloy'?

Dave

HTS-2000 any good?
 

On May 20, 10:33*am, "
wrote:
Is this stuff any good? I want to fabricate some small AL tubes in the
from of a cube?

http://www.aluminumrepair.com/index.asp
I'm guessing a zinc alloy, but is it good?

Karl

Decorative or structural?

HTS-2000 any good?
 

HTS-2000 any good?
 

On May 20, 6:54 am, Bob Engelhardt wrote:
wrote:

...

I'm guessing a zinc alloy, but is it good?

If it melts with propane, it almost certainly is zinc based. I've used
the hardware store variety and it's useful, but not nearly as good as
they say (surprise). This stuff is certainly not $65 a lb (+ shipping)
good (I paid $16ish). It's best use is filling stripped/wallowed out
holes for re-drilling (& tapping). It's weakest use is under tension.
What sort of stress will your cubes be subjected to?

Bob

Pretty much what I thought. Thanks everyone.
Looking it up to post a link. This version says it has stainless steel
corners.
http://trapezerigging.com/JugglingCube/
Makes sense. I was wondering how the Al would hold up to use.
You can see by the price why we'd rather make a couple.
Thanks
Karl

HTS-2000 any good?
 

wrote:

On May 20, 6:54 am, Bob Engelhardt wrote:

wrote:

...


I'm guessing a zinc alloy, but is it good?

If it melts with propane, it almost certainly is zinc based. I've used
the hardware store variety and it's useful, but not nearly as good as
they say (surprise). This stuff is certainly not $65 a lb (+ shipping)
good (I paid $16ish). It's best use is filling stripped/wallowed out
holes for re-drilling (& tapping). It's weakest use is under tension.
What sort of stress will your cubes be subjected to?

Bob


Pretty much what I thought. Thanks everyone.
Looking it up to post a link. This version says it has stainless steel
corners.
http://trapezerigging.com/JugglingCube/
Makes sense. I was wondering how the Al would hold up to use.
You can see by the price why we'd rather make a couple.
Thanks
Karl

Find a TIG welding shop that will make the corner blocks for you, or
cut and fit, and silver solder the parts yourself.

The rest of the cube is overpriced tubing.

Work out the attachemnt by whatever means you prefer.

Cheers
Trevor Jones

HTS-2000 any good?
 

On May 21, 10:56 am, Trevor Jones wrote:
wrote:
On May 20, 6:54 am, Bob Engelhardt wrote:

wrote:

...

I'm guessing a zinc alloy, but is it good?

If it melts with propane, it almost certainly is zinc based. I've used
the hardware store variety and it's useful, but not nearly as good as
they say (surprise). This stuff is certainly not $65 a lb (+ shipping)
good (I paid $16ish). It's best use is filling stripped/wallowed out
holes for re-drilling (& tapping). It's weakest use is under tension.
What sort of stress will your cubes be subjected to?

Bob

Pretty much what I thought. Thanks everyone.
Looking it up to post a link. This version says it has stainless steel
corners.
http://trapezerigging.com/JugglingCube/
Makes sense. I was wondering how the Al would hold up to use.
You can see by the price why we'd rather make a couple.
Thanks
Karl

Find a TIG welding shop that will make the corner blocks for you, or
cut and fit, and silver solder the parts yourself.

The rest of the cube is overpriced tubing.

Work out the attachemnt by whatever means you prefer.

Cheers
Trevor Jones

I can silver solder. Now that I've come across the secret of the
corners It should be possible to make it with tools on hand. Just got
to find reasonably priced Al tube.
Thanks
Karl .

HTS-2000 any good?
 

wrote:
On May 21, 10:56 am, Trevor Jones wrote:

wrote:

On May 20, 6:54 am, Bob Engelhardt wrote:

wrote:

...

I'm guessing a zinc alloy, but is it good?

If it melts with propane, it almost certainly is zinc based. I've used
the hardware store variety and it's useful, but not nearly as good as
they say (surprise). This stuff is certainly not $65 a lb (+ shipping)
good (I paid $16ish). It's best use is filling stripped/wallowed out
holes for re-drilling (& tapping). It's weakest use is under tension.
What sort of stress will your cubes be subjected to?

Bob

Pretty much what I thought. Thanks everyone.
Looking it up to post a link. This version says it has stainless steel
corners.
http://trapezerigging.com/JugglingCube/
Makes sense. I was wondering how the Al would hold up to use.
You can see by the price why we'd rather make a couple.
Thanks
Karl

Find a TIG welding shop that will make the corner blocks for you, or
cut and fit, and silver solder the parts yourself.

The rest of the cube is overpriced tubing.

Work out the attachemnt by whatever means you prefer.

Cheers
Trevor Jones


I can silver solder. Now that I've come across the secret of the
corners It should be possible to make it with tools on hand. Just got
to find reasonably priced Al tube.
Thanks
Karl .

See what you can find for Titanium tubing.

There are a lot of Ti. tubes used in the aircraft industry as
hydraulic and fuel lines, and you may be able to source some out that
have lost their certs. Compared to aluminum, Ti. tube is noticably
lighter, and very stiff.

Cheers
Trevor Jones

HTS-2000 any good?
 

On May 22, 2:30 am, Trevor Jones wrote:
wrote:
On May 21, 10:56 am, Trevor Jones wrote:

wrote:

On May 20, 6:54 am, Bob Engelhardt wrote:

wrote:

...

I'm guessing a zinc alloy, but is it good?

If it melts with propane, it almost certainly is zinc based. I've used
the hardware store variety and it's useful, but not nearly as good as
they say (surprise). This stuff is certainly not $65 a lb (+ shipping)
good (I paid $16ish). It's best use is filling stripped/wallowed out
holes for re-drilling (& tapping). It's weakest use is under tension.
What sort of stress will your cubes be subjected to?

Bob

Pretty much what I thought. Thanks everyone.
Looking it up to post a link. This version says it has stainless steel
corners.
http://trapezerigging.com/JugglingCube/
Makes sense. I was wondering how the Al would hold up to use.
You can see by the price why we'd rather make a couple.
Thanks
Karl

Find a TIG welding shop that will make the corner blocks for you, or
cut and fit, and silver solder the parts yourself.

The rest of the cube is overpriced tubing.

Work out the attachemnt by whatever means you prefer.

Cheers
Trevor Jones

I can silver solder. Now that I've come across the secret of the
corners It should be possible to make it with tools on hand. Just got
to find reasonably priced Al tube.
Thanks
Karl .

See what you can find for Titanium tubing.

There are a lot of Ti. tubes used in the aircraft industry as
hydraulic and fuel lines, and you may be able to source some out that
have lost their certs. Compared to aluminum, Ti. tube is noticably
lighter, and very stiff.

Cheers
Trevor Jones

I hadn't thought of that. I assumed it was out of our price range.
Thanks
Karl