Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Joe Gwinn
Joe...
Want a threading attachment for Hardinge HC? With a bunch of "cam followers" or whatever? i On 2008-05-19, Gunner Asch wrote: On Mon, 19 May 2008 01:15:41 -0500, Ignoramus24782 wrote: I used to get $500 for a used motor for HCs/DV-59s, etc etc. Now you can buy the whole lathe for that price. Any idea what a "threading attachment", with a bunch of threaded cams, for that chucker, would be worth? Tom gave me that one in trade for something. i Joe Gwinn IIRC is looking for one for his new HC. The threading attachment (and the back mounting plate) is worth about $300, the threading masters are worth about $35 each, depending on how many are on Ebay at the moment. Sometimes less, other times more. At the moment..about $300 for attachment and masters are about right. Next month...shrug Cool. Thanks. They are gettting more and more common as companies are dumping/scrapping their HCs so the value is going down. I gave away a threading attachment about a year ago, and traded a couple dozen thread masters for an ancient Hobart gas powered welder off a Liberty ship, that Ive not brought home yet, but it was between friends Gunner Political Correctness is a doctrine fostered by a delusional, illogical liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Joe Gwinn
On 2008-05-20, Gunner Asch wrote:
My mistake Iggy..I just dug back into my emails...and its Ralph Seguin that needs em Oops. Anyway. It will go on ebay. i Cringe...sorry Gunner On Mon, 19 May 2008 07:16:44 -0500, Ignoramus31588 wrote: Joe... Want a threading attachment for Hardinge HC? With a bunch of "cam followers" or whatever? i On 2008-05-19, Gunner Asch wrote: On Mon, 19 May 2008 01:15:41 -0500, Ignoramus24782 wrote: I used to get $500 for a used motor for HCs/DV-59s, etc etc. Now you can buy the whole lathe for that price. Any idea what a "threading attachment", with a bunch of threaded cams, for that chucker, would be worth? Tom gave me that one in trade for something. i Joe Gwinn IIRC is looking for one for his new HC. The threading attachment (and the back mounting plate) is worth about $300, the threading masters are worth about $35 each, depending on how many are on Ebay at the moment. Sometimes less, other times more. At the moment..about $300 for attachment and masters are about right. Next month...shrug Cool. Thanks. They are gettting more and more common as companies are dumping/scrapping their HCs so the value is going down. I gave away a threading attachment about a year ago, and traded a couple dozen thread masters for an ancient Hobart gas powered welder off a Liberty ship, that Ive not brought home yet, but it was between friends Gunner Political Correctness is a doctrine fostered by a delusional, illogical liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. Political Correctness is a doctrine fostered by a delusional, illogical liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Joe Gwinn
My mistake Iggy..I just dug back into my emails...and its Ralph Seguin
that needs em Cringe...sorry Gunner On Mon, 19 May 2008 07:16:44 -0500, Ignoramus31588 wrote: Joe... Want a threading attachment for Hardinge HC? With a bunch of "cam followers" or whatever? i On 2008-05-19, Gunner Asch wrote: On Mon, 19 May 2008 01:15:41 -0500, Ignoramus24782 wrote: I used to get $500 for a used motor for HCs/DV-59s, etc etc. Now you can buy the whole lathe for that price. Any idea what a "threading attachment", with a bunch of threaded cams, for that chucker, would be worth? Tom gave me that one in trade for something. i Joe Gwinn IIRC is looking for one for his new HC. The threading attachment (and the back mounting plate) is worth about $300, the threading masters are worth about $35 each, depending on how many are on Ebay at the moment. Sometimes less, other times more. At the moment..about $300 for attachment and masters are about right. Next month...shrug Cool. Thanks. They are gettting more and more common as companies are dumping/scrapping their HCs so the value is going down. I gave away a threading attachment about a year ago, and traded a couple dozen thread masters for an ancient Hobart gas powered welder off a Liberty ship, that Ive not brought home yet, but it was between friends Gunner Political Correctness is a doctrine fostered by a delusional, illogical liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. Political Correctness is a doctrine fostered by a delusional, illogical liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|