Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Chop saw or band saw
"Michael Koblic" wrote:
I have an occasional need to cut stock of up to 2 inch diameter (or square, shapes differ). I have been thinking of making my life easier and investing in a chop saw. However, recently I came across a phenomenon called a portable band saw. I have never seen this tool first hand. I understand that it is capable of cutting up to 4 inches. It can be operated off-hand or a stand is available which then allows the saw to be used as a chop saw including cutting accurate miters. Are you cutting aluminum or steel? For aluminum, I use my wood chop saw. For steel, I head over to uncles and use his metal cutting band saw. Wes |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|