DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Chevy drain plug (https://www.diybanter.com/metalworking/242235-chevy-drain-plug.html)

David Courtney April 6th 08 05:00 PM

Chevy drain plug
 
I can't find the original thread, but I happened to be changing the oil
in my Silverado pick-up yesterday and I remembered there was some discussion
about whether the drain plugs were actually magnetic or just looked like
they should be magnetic (lol).
There was no "fuzz" on it when I removed it, but it stuck nicely to the
frame of the truck... powerful enough to hold it's own weight, at least.
The magnet is actually a separate insert that spins freely on the end of the
plug, swaged in, I guess.
It also has a nice rubber o-ring type seal in a recess so you can't
squash it by over-tightening the plug... it really seems like a good design.
This is my second Silverado pick-up and they both have this plug, so I
assume it's the stock plug.
There's probably only one person that cares, if the OP is even around
any more... but while I had it out, I took a picture of it:
http://forums.pstuning.com/index.php...gentry&id=1424




All times are GMT +1. The time now is 09:04 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter