|
New Ceo Manual
By the time you finish reading this book, you'll be ready to be CEO...
There is a very good reason why you are not the CEO - you are obviously not enough of a scumbag... yet. How to Lie Cheat & Steal Your Way to the TOP is a take-no-prisoners guide to surviving the daily corporate warfare that is office politics. Every company has politics and politicians. You need to learn how to use politics to your advantage and how to get ahead without raising a sweat. This is the book your bosses did not want published. All of their grubby little secrets contained in this volume, are now available to the general public. You'll learn such things as: how the company spends its money and what you'll have to do to make a large chunk of it yours; how bosses fritter away their time (and expect you to make up for it); how to look like you're working harder than you really are; how to avoid all responsibility when things go wrong; how to take credit for something you were not involved in; how to 'stab' people in the back and escape undetected; how to suck-up to the right people; shredding any remaining sense of morality or fair-play you may have In short, this book will equip you with all the skills you need for career survival and your climb to the TOP of the executive ladder Millwright Ron www.unionmillwright.com |
New Ceo Manual
"Millwright Ron" wrote in message ... By the time you finish reading this book, you'll be ready to be CEO... snip Sounds like sour grapes, get turned down for that promotion to assistant to the assistant toilet cleaner? So much for your management aspirations, eh??? |
New Ceo Manual
Tom Gardner wrote:
"Millwright Ron" wrote in message ... By the time you finish reading this book, you'll be ready to be CEO... snip Sounds like sour grapes, get turned down for that promotion to assistant to the assistant toilet cleaner? So much for your management aspirations, eh??? And he has the perfect tounge for the job, too. -- My sig file can beat up your sig file! |
New Ceo Manual
Millwright Ron wrote:
By the time you finish reading this book, Still using a non union-made Chinese made computer, Ron? -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
New Ceo Manual
"David R. Birch" wrote:
Gee, Ron, I recognize your source for this since it reminds me of how the workers treated each other in the union shop at Briggs & Stratton where I worked for a year. I stood out and came under pressure from the other "workers" because I WORKED for a year. Too bad your union rhetoric only refers to how they once were and ignores how they are now. He wouldn't know. He slept all day instead of working, but the union protected his 'job'. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
New Union Manual
Original publication BEFORE Millwright Wrong edited it........... Millwright Ron wrote in article ... By the time you finish reading this book, you'll be ready to be a high- ranking Union Officer... There is a very good reason why you are not the Union President - you are obviously not enough of a scumbag... yet. How to Lie Cheat & Steal Your Way to the TOP is a take-no-prisoners guide to surviving the daily warfare that is union leadership politics. Every union has politics and politicians. You need to learn how to use politics to your advantage and how to get ahead without raising a sweat. This is the book your union officers did not want published. All of their grubby little secrets contained in this volume, are now available to the general union membership. You'll learn such things as: how the union spends its money and what you'll have to do to make a large chunk of it yours; how union bosses fritter away their time (and expect you to pay for it); how to look like you're working harder than you really are; how to avoid all responsibility when things go wrong; how to take credit for something you were not involved in; how to 'stab' people in the back and escape undetected; how to suck-up to the right people; shredding any remaining sense of morality or fair-play you may have In short, this book will equip you with all the skills you need for career survival and your climb to the TOP of the union ladder Millwright Ron www.unionmillwright.com |
New Ceo Manual
On Mar 9, 8:56*pm, "Michael A. Terrell"
wrote: Millwright Ron wrote: By the time you finish reading this book, * *Still using a non union-made Chinese made computer, Ron? -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida My computer is made by a Union Worker. "Me" Millwright Ron www.unionmillwright.com |
New Ceo Manual
Millwright Ron wrote:
My computer is made by a Union Worker. "Me" And your Chinese owners thank you. -- My sig file can beat up your sig file! |
New Ceo Manual
On Mar 10, 12:48*pm, Bill wrote:
Millwright Ron wrote in news:70975f67-998e- : On Mar 9, 8:56*pm, "Michael A. Terrell" wrote: Millwright Ron wrote: By the time you finish reading this book, * *Still using a non union-made Chinese made computer, Ron? -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida My computer is made by a Union Worker. *"Me" Millwright Ron www.unionmillwright.com Really.....so how pray tell did you fabricate the components...oh wait you meant you 'ASSEMBLED' a pc by yourself. *So did the PC fairy put these 'Union' made items under your pillow or did you buy non-union foreign made parts. *The more you talk the bigger hole you dig, maybe if you keep talking you can bring the joys of Unions to the Chinese. *I'm sure they would appreciate it. Bill- Hide quoted text - - Show quoted text - Bill.... Do you fabricate anything but talk? |
New Ceo Manual
On Mon, 10 Mar 2008 11:13:50 -0700 (PDT), Millwright Ron
wrote: On Mar 9, 8:56*pm, "Michael A. Terrell" wrote: Millwright Ron wrote: By the time you finish reading this book, * *Still using a non union-made Chinese made computer, Ron? -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida My computer is made by a Union Worker. "Me" Millwright Ron www.unionmillwright.com But are the parts you use to build it made by Union workers? Or, even Made in America? If not you are exploiting the Chinese/Malaysian/Vietnamese slave workers, aren't you? Bruce-in-Bangkok (correct email address for reply) |
New Ceo Manual
On Mar 10, 8:09*pm, Bruce in Bangkok wrote:
On Mon, 10 Mar 2008 11:13:50 -0700 (PDT), Millwright Ron wrote: On Mar 9, 8:56*pm, "Michael A. Terrell" wrote: Millwright Ron wrote: By the time you finish reading this book, * *Still using a non union-made Chinese made computer, Ron? -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida My computer is made by a Union Worker. *"Me" Millwright Ron www.unionmillwright.com But are the parts you use to build it made by Union workers? Or, even Made in America? If not you are exploiting the Chinese/Malaysian/Vietnamese slave workers, aren't you? Bruce-in-Bangkok (correct email address for reply)- Hide quoted text - - Show quoted text - ************************************************** ************************************************** ****** If I could get products made in America by Union workers. I would and I do as much as possible. I support the small Mom and Pop local stores. I eat cheese from Wisconsin,Chickens from Washington,Potatoes from Idaho,Oranges from Florida,beef from my neighbors, chickens from my hen house, books from the local book store, the local news paper,fishing tackle from the blue goose,I reload my own bullets,I support the local logging industry.Just because someone is non-union does not make them a bad person nor does it make them a bad person in they are Union. Buy American,Buy from the local stores.Support the local economy. Keep your money at home. Frank Lloyd Wright: If capitalism is fair then unionism must be. If men have a right to capitalize their ideas and the resources of their country, then that implies the right of men to capitalize their labor. Thomas Jefferson: A wise and frugal government, which shall leave men free to regulate their own pursuits of industry and improvement, and shall not take from the mouth of labor and bread it has earned -- this is the sum of good government. Union Millwright and Damn Proud Of It... Millwright Ron www.unionmillwright.com |
New Ceo Manual
On Mon, 10 Mar 2008 22:13:21 -0700 (PDT), Millwright Ron
wrote: On Mar 10, 8:09*pm, Bruce in Bangkok wrote: On Mon, 10 Mar 2008 11:13:50 -0700 (PDT), Millwright Ron wrote: On Mar 9, 8:56*pm, "Michael A. Terrell" wrote: Millwright Ron wrote: By the time you finish reading this book, * *Still using a non union-made Chinese made computer, Ron? -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida My computer is made by a Union Worker. *"Me" Millwright Ron www.unionmillwright.com But are the parts you use to build it made by Union workers? Or, even Made in America? If not you are exploiting the Chinese/Malaysian/Vietnamese slave workers, aren't you? Bruce-in-Bangkok (correct email address for reply)- Hide quoted text - - Show quoted text - ************************************************* ************************************************** ******* If I could get products made in America by Union workers. I would and I do as much as possible. I support the small Mom and Pop local stores. I eat cheese from Wisconsin,Chickens from Washington,Potatoes from Idaho,Oranges from Florida,beef from my neighbors, chickens from my hen house, books from the local book store, the local news paper,fishing tackle from the blue goose,I reload my own bullets,I support the local logging industry.Just because someone is non-union does not make them a bad person nor does it make them a bad person in they are Union. Buy American,Buy from the local stores.Support the local economy. Keep your money at home. Frank Lloyd Wright: If capitalism is fair then unionism must be. If men have a right to capitalize their ideas and the resources of their country, then that implies the right of men to capitalize their labor. Thomas Jefferson: A wise and frugal government, which shall leave men free to regulate their own pursuits of industry and improvement, and shall not take from the mouth of labor and bread it has earned -- this is the sum of good government. Union Millwright and Damn Proud Of It... Millwright Ron www.unionmillwright.com You seem to be ignoring the question. "You are exploiting the Chinese/Malaysian/Vietnamese slave workers, aren't you?" Bruce-in-Bangkok (correct email address for reply) |
New Ceo Manual
Millwright Ron wrote:
If I could get products made in America by Union workers. You can't get those parts, US made because union greed has sent all those jobs overseas. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
New Ceo Manual
Millwright Ron wrote:
My computer is made by a Union Worker. "Me" The ability to use a #2 Philips screw driver and plug a few cables and boards together is not 'building' a computer. A monkey could be trained to do it. In fact, you are proof of that. It involves selecting a chipset, designing the circuit, laying out the PC board and sourcing all the parts. Then you have to create a profile for the reflow oven, write the routines for the pick and place machines, write the driver software, along with the BIOS. Something that has likely never been done by union people because it requires the ability to think and work without worrying which union gets which part of the job. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
| All times are GMT +1. The time now is 06:30 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter