DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Brown & Sharpe 99-1033 digital indicator (https://www.diybanter.com/metalworking/226704-brown-sharpe-99-1033-digital-indicator.html)

[email protected] December 19th 07 09:00 PM

Brown & Sharpe 99-1033 digital indicator
 
Hi.
Just received the B&S digital dial indicator that I won on EBAY.
Didn't know much about it, but now I see it requires an AC power
adapter/battery charger, which of course, were not included in the
sale.

Looks like it uses a standard coaxial power plug. I have searched the
WWW, but no mention of the specs of the power adapter. Can anyone help
here?

It's also missing the tip of the plunger, but I can get or make one of
those.

TIA

Paul in Central Oregon


Richard J Kinch December 19th 07 11:42 PM

Brown & Sharpe 99-1033 digital indicator
 
writes:

I have searched the
WWW, but no mention of the specs of the power adapter. Can anyone help
here?


These were typically 5VDC with + in the center. If you don't have a
variable power supply to experiment with, you might get one of the switch-
configurable ones from Radio Shack and step it up until it works.

[email protected] December 20th 07 02:13 AM

Brown & Sharpe 99-1033 digital indicator
 
On Dec 19, 3:42 pm, Richard J Kinch wrote:
writes:
I have searched the
WWW, but no mention of the specs of the power adapter. Can anyone help
here?


These were typically 5VDC with + in the center. If you don't have a
variable power supply to experiment with, you might get one of the switch-
configurable ones from Radio Shack and step it up until it works.


Thanks, Richard. I will try that when I get to the plant tomorrow.

Paul

[email protected] December 20th 07 07:24 PM

Brown & Sharpe 99-1033 digital indicator
 
On Dec 19, 6:13 pm, " wrote:
On Dec 19, 3:42 pm, Richard J Kinch wrote:

writes:
I have searched the
WWW, but no mention of the specs of the power adapter. Can anyone help
here?


These were typically 5VDC with + in the center. If you don't have a
variable power supply to experiment with, you might get one of the switch-
configurable ones from Radio Shack and step it up until it works.


Thanks, Richard. I will try that when I get to the plant tomorrow.

Paul


Well, no luck with the power adapter. So, I disassembled the unit.
Front half comes off easily after removing 3 microscopic screws! All
looks ok until I finally spotted the battery. Has lots of gray hairs
all over one end.

I let my general manager continue the disassembly, appropriately ESD
protected, and he pulled a circuit board and the battery. A 4 cell NmH
unit from Varta. It had only a single operating cell. The rest were
dead short. A google search turned up the Battery Station with the
replacement for $10.00. Should have a new battery by next year. Then
we can move on to the next step to see if it still will work.

Will let you know the result.

Paul


All times are GMT +1. The time now is 11:02 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter