Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Recommendation for tap fit hole tolerance in 4140 pre-hard steel
John2005 wrote:
Hi everyone, (sniped) I'm just curious what's usually recommended for an easy tap fit. Thanks John To begin with I wouldn't "pound" it in. It should be PRESSED. ...lew... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Recommendation for tap fit hole tolerance in 4140 pre-hard steel | Metalworking | |||
Recommendation for tap fit hole tolerance in 4140 pre-hard steel | Metalworking | |||
Kreg Pocket Hole Jig Recommendation | Woodworking | |||
Tolerance: Hole based vs Shaft based system | Metalworking | |||
Source of 4140 ordinance steel? | Metalworking |