Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Diacro Punches - Where to get them?
I recently purchased a Diacro punch similar to the one shown here....
http://cgi.ebay.com/DIACRO-PUNCH-NO-...QQcmdZViewItem Where does one buy the punches that are used in this punch? Any suggested sources and information as to what to look for in punches would be appreciated. thanks TMT |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Diacro Punches - Where to get them?
--FWIW Diacro has changed its name to Strippit; try googling on
that. -- "Steamboat Ed" Haas : Whatever happened Hacking the Trailing Edge! : to Andy Philbrick? www.nmpproducts.com ---Decks a-wash in a sea of words--- |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Diacro Punches - Where to get them?
On Oct 27, 11:10 am, steamer wrote:
--FWIW Diacro has changed its name to Strippit; try googling on that. -- "Steamboat Ed" Haas : Whatever happened Hacking the Trailing Edge! : to Andy Philbrick? www.nmpproducts.com ---Decks a-wash in a sea of words--- Thanks Ed. Anyone else? TMT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hal Turner pulls no punches! | Home Repair | |||
DiAcro PDF issues | Metalworking | |||
diacro 1A | Metalworking | |||
Diacro Gone? | Metalworking | |||
Diacro Brake | Metalworking |