Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Nite-Ize 3-LED Mini-Mag Upgrade
As I wandered through the sporting good section at Wally World the
other day, I broke down and bought the triple LED adaptor for the 2-AA Mini-Mag. I installed it today after seeing how much light the beastie put out. Mastech MS 8209 megamultimeter. The standard Mini-Mag bulb gives 480 Lux at 1 foot with the focus to tight beam. The NiteIze adaptor gives 2,160 Lux at 1 foot. I could see (subjectively) a great diffference quite clearly but the lightmeter (albeit a fairly cheap one, the MM was only $80 or so) gave it more objectivity. It's definitely a good upgrade for $4.82. Two thumbs up! -- Instant Gratification Takes Too Long! ------------------------------------- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Nite light warning | Home Repair | |||
FA: Tomorrow niteTWO(2) BRAND-NEW RCA RADIOTRON 872A RECTIFIER TUBESUSA | Electronics Repair | |||
LED Nite Lite | Home Repair | |||
Proxxon/Merlin e-motor mini-grinder vs mini air die grin | Woodworking | |||
OT : Best costumes last nite??? | Woodworking |