| Page 1 of 2 | 1 | 2 |
|
|
That damned Tool Farie stikes again
After a Computer crash and the demise of civilization, it was learned
Gunner Asch wrote on Mon, 17 Sep 2007 02:54:52 -0700 in rec.crafts.metalworking : This sort of fast and furious meat harvesting is fairly common in the western states. Usually illegal aliens will shoot a cow out in a distant field, and have it chopped up (chainsaw), loaded and be gone before the rancher hears the echo of the shot. Errg. Not good. Tends to sour the milk of human kindness. tschus pyotr Indeed, and in some cases...earn you the S3 award Shoot, shovel and shutup. Sounds fair to me. I don't like it, but it sounds reasonable. pyotr when I say "I don't like it" that it more on the lines of "I don't like the fact that such things are necessary." In the same category as abortion, divorce and capital punishment, things there would be no need for, did we not live in an imperfect world. -- pyotr filipivich "Quemadmoeum gladuis neminem occidit, occidentis telum est. " Lucius Annaeus Seneca, circa 45 AD (A sword is never a killer, it is a tool in the killer's hands.) |
That damned Tool Farie stikes again
When I wasnt looking, someone stuck a nasty old cast iron table with 2
drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner |
That damned Tool Farie stikes again
Wow, You really know how to rub it in.
Simon Shabtai Evan Gunner wrote: When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner |
That damned Tool Farie stikes again
"Gunner" wrote in message ... When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Gunner That's really something....aren't most keys brass or some type of non-ferrous metal? But then again, I can only imagine what you may be carrying on your keyring. Shawn |
That damned Tool Farie stikes again
On Tue, 11 Sep 2007 21:31:32 -0700, with neither quill nor qualm,
Gunner quickly quoth: When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. That happens to you a lot, doesn't it, Gunner? Pobrecito! ;) Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. What, and have the enviros all over you for harming fishies? DON'T DO IT! Speaking of that, the U.S. gov't is giving us 8 million dollars to remove the local dam. Seems the fish ladders (smooth concrete) harms fish (salmon and steelhead, specifically) who spawn upstream but who have never been damaged by swimming miles and miles over sharp rocks in 3" of water. These enviros, I swear... Though..they might look pretty good in the front hard, with flower pots on em. Let 'em rust up in your front yard like everyone else does. sigh Space is pretty big, aint it? Not at your house. Hmm, speaking of which, did you ever find time to look for L6-20x stuff last weekend? -- If you turn the United States on its side, everything loose will fall to California. --Frank Lloyd Wright |
That damned Tool Farie stikes again
Gunner wrote in
: snip And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . snip Tighter than a pig???? I didn't know you were from West Virginia Gunner......... :) I wish the tool fairy would visit me, what do I have to put under my pillow?? Bill P.S. Of course the TF would have to bring along a bigger shop first... |
That damned Tool Farie stikes again
Gunner wrote:
When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. I feel so sad that some one dumped this trash on you. If'n you put a tarp over things, I'll be over just after the first of the year when I have some vacation time to haul this trash away. Don't worry about the incredable expense I'll have driving from Michigan to your place, I'll cover it since I'm a nice guy. Just make sure no bad farie gets its hands on the stuff. Wes |
That damned Tool Farie stikes again
On Wed, 12 Sep 2007 04:08:55 -0700, Larry Jaques
wrote: On Tue, 11 Sep 2007 21:31:32 -0700, with neither quill nor qualm, Gunner quickly quoth: When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. That happens to you a lot, doesn't it, Gunner? Pobrecito! ;) Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. What, and have the enviros all over you for harming fishies? DON'T DO IT! Speaking of that, the U.S. gov't is giving us 8 million dollars to remove the local dam. Seems the fish ladders (smooth concrete) harms fish (salmon and steelhead, specifically) who spawn upstream but who have never been damaged by swimming miles and miles over sharp rocks in 3" of water. These enviros, I swear... Though..they might look pretty good in the front hard, with flower pots on em. Let 'em rust up in your front yard like everyone else does. sigh Space is pretty big, aint it? Not at your house. Hmm, speaking of which, did you ever find time to look for L6-20x stuff last weekend? I found the milk carton. What is it that you need? Sigh..I cant remember the details. So much to do..so little time. Gunner |
That damned Tool Farie stikes again
On Wed, 12 Sep 2007 08:41:01 -0400, Wes wrote:
Gunner wrote: When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. I feel so sad that some one dumped this trash on you. If'n you put a tarp over things, I'll be over just after the first of the year when I have some vacation time to haul this trash away. Don't worry about the incredable expense I'll have driving from Michigan to your place, I'll cover it since I'm a nice guy. Just make sure no bad farie gets its hands on the stuff. Wes Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? Road Trip!! Gunner |
That damned Tool Farie stikes again
On Wed, 12 Sep 2007 10:31:37 -0700, "Tom Gardner"
wrote: "Gunner" wrote in message .. . When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner You need a new lock for the trailer? Nah..its a flatbed. Id have to build a cage and stuff. G Gunner |
That damned Tool Farie stikes again
"Gunner" wrote in message ... On Wed, 12 Sep 2007 10:31:37 -0700, "Tom Gardner" wrote: "Gunner" wrote in message . .. When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner You need a new lock for the trailer? Nah..its a flatbed. Id have to build a cage and stuff. G Gunner Well then...you're ****ed! People are just going to keep on piling trash on it when you're not looking. |
That damned Tool Farie stikes again
"Gunner" wrote in message ... When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner You need a new lock for the trailer? |
That damned Tool Farie stikes again
Gunner wrote:
Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? I don't want to get your hopes up. That was a tongue-in-cheek response. Grayling, Mi is whopping 32 miles from me. If the company ever sends me for training in California, I'll drop you a line. Wes |
That damned Tool Farie stikes again
Bill wrote:
Gunner wrote in : snip And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . snip Tighter than a pig???? I didn't know you were from West Virginia Gunner......... :) I wish the tool fairy would visit me, what do I have to put under my pillow?? Bill P.S. Of course the TF would have to bring along a bigger shop first... The shop fairies are in a different union. The big problem is that they are all British, and spend all their time in pubs. When they get drunk enough, they have someone turn on their computers and log them into news:rec.crafts.metalworking so they can troll, till they pass out. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
That damned Tool Farie stikes again
Gunner wrote:
When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? It is inside Hawkie's head. In fact, its half vast. Gunner Come on,Gunner! You're know that you're no good atplaying stupid! Look at KKliff, Chicken Hawkie and a few others and you'll see what I mean. They are world class stupid without even trying. They are even stupid while they sleep! Repeat after me! "Leave stupidity to the experts! Do NOT try this at home!" ;-) -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
That damned Tool Farie stikes again
Gunner wrote:
Nah..its a flatbed. I'd have to build a cage and stuff. Or just put a hitch on the back to haul a second trailer. How many trailers do you think you could haul in tandem before the Chippies had a hissy fit? ;-) -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
That damned Tool Farie stikes again
Gunner's been dipping into that black pot hooch out back agin..:)
JR Dweller in the cellar Gunner wrote: When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth If you're not the lead dog, the view never changes Doubt yourself, and the real world will eat you alive The world doesn't revolve around you, it revolves around me No skeletons in the closet; just decomposing corpses -------------------------------------------------------------- Dependence is Vulnerability: -------------------------------------------------------------- "Open the Pod Bay Doors please, Hal" "I'm sorry, Dave, I'm afraid I can't do that.." |
That damned Tool Farie stikes again
On Sep 11, 11:31 pm, Gunner wrote:
When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner Congrats on the catch of the day! TMT |
That damned Tool Farie stikes again
"Wes" wrote in message ... Gunner wrote: Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? I don't want to get your hopes up. That was a tongue-in-cheek response. Grayling, Mi is whopping 32 miles from me. If the company ever sends me for training in California, I'll drop you a line. Wes Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. |
That damned Tool Farie stikes again
On Wed, 12 Sep 2007 14:40:58 -0400, Wes wrote:
Gunner wrote: Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? I don't want to get your hopes up. That was a tongue-in-cheek response. Grayling, Mi is whopping 32 miles from me. If the company ever sends me for training in California, I'll drop you a line. Wes I dont think it will fit in the overhead bin....sigh Gaylord? I lived there a few years. Gunner |
That damned Tool Farie stikes again
On Wed, 12 Sep 2007 16:51:16 -0700, Too_Many_Tools
wrote: On Sep 11, 11:31 pm, Gunner wrote: When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner Congrats on the catch of the day! TMT I was wrong though...sigh...its not a Harig. Only the air thingy for sharpening endmills is. Its actually a KO Lee. Sigh...front yard for sure. Gunner |
That damned Tool Farie stikes again
Gunner wrote:
If the company ever sends me for training in California, I'll drop you a line. Wes I dont think it will fit in the overhead bin....sigh Gaylord? I lived there a few years. Nah, a bit south of the trout capitol of the world. Wes |
That damned Tool Farie stikes again
"Tom Gardner" wrote:
If the company ever sends me for training in California, I'll drop you a line. Wes Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. Well if we mooch Gunners ammo likely a short stay, ifn we bring ours and share he might even invite us back ;) Wes |
That damned Tool Farie stikes again
Tom Gardner wrote:
"Wes" wrote in message ... Gunner wrote: Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? I don't want to get your hopes up. That was a tongue-in-cheek response. Grayling, Mi is whopping 32 miles from me. If the company ever sends me for training in California, I'll drop you a line. Wes Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. Sounds like fun. You could pick me up on your way past TX. |
That damned Tool Farie stikes again
On Thu, 13 Sep 2007 08:31:53 -0400, Wes wrote:
"Tom Gardner" wrote: If the company ever sends me for training in California, I'll drop you a line. Wes Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. Well if we mooch Gunners ammo likely a short stay, ifn we bring ours and share he might even invite us back ;) Wes Indeed. Or bring powder, primer and bullets and keep up with the demand. G Gunner |
That damned Tool Farie stikes again
On Thu, 13 Sep 2007 08:30:35 -0400, Wes wrote:
Gunner wrote: If the company ever sends me for training in California, I'll drop you a line. Wes I dont think it will fit in the overhead bin....sigh Gaylord? I lived there a few years. Nah, a bit south of the trout capitol of the world. Wes http://www.google.com/search?q=trout...ient=firefox-a lol Gunner |
That damned Tool Farie stikes again
After a Computer crash and the demise of civilization, it was learned
Gunner wrote on Wed, 12 Sep 2007 23:21:08 -0700 in rec.crafts.metalworking : On Wed, 12 Sep 2007 16:51:16 -0700, Too_Many_Tools wrote: On Sep 11, 11:31 pm, Gunner wrote: When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. And a box of wierd ashtray looking round stone things and some flat round things. But they all got holes in the middle, so they wont hold butts worth a damn. Might be pretty good RC Cola soda coasters though.... And a flat thingy with lines running across it. When I put my truck keys down on it..they stuck tighter than a pig. Had to pry em off with a rope . Would this stuff make good boat anchors? Mighty pretty though...nice shiney paint and stuff. Be a shame to dump em in the creek. Though..they might look pretty good in the front hard, with flower pots on em. I asked the guy whose shop I wuz working at about em, he claimed he never saw em before..then mumbled something about needing the space. Space is pretty big, aint it? Gunner Congrats on the catch of the day! TMT I was wrong though...sigh...its not a Harig. Only the air thingy for sharpening endmills is. Its actually a KO Lee. Sigh...front yard for sure. Its people like you, whot cause unrest. pyotr -- pyotr filipivich Old farts these days - no like when I was a boy. We used to have us Real Geezers in those days. Now, they'll let anybody with a little gray hair be an old fart. |
That damned Tool Farie stikes again
Gunner wrote:
Nah, a bit south of the trout capitol of the world. Wes http://www.google.com/search?q=trout...ient=firefox-a lol Gunner Don't tell those people just up the road. They think they are the Trout Capitol. You have to have seen their famous fish with the 10,000.00 paint job. http://wess.freeshell.org/usenet/rec...king/trout.jpg When were you last in Michigan? Wes |
That damned Tool Farie stikes again
"Pete C." wrote in message ... Tom Gardner wrote: "Wes" wrote in message ... Gunner wrote: Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? I don't want to get your hopes up. That was a tongue-in-cheek response. Grayling, Mi is whopping 32 miles from me. If the company ever sends me for training in California, I'll drop you a line. Wes Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. Sounds like fun. You could pick me up on your way past TX. GREAT IDEA!!! Let's ALL go to Gunner's for a few weeks! Throw another shrimp on the barby. |
That damned Tool Farie stikes again
On Sep 11, 10:31 pm, Gunner wrote:
When I wasnt looking, someone stuck a nasty old cast iron table with 2 drill press thngies mounted on it. in my trailer Both the table and the drill thingies say Walker-Turner or some such. Each got one of those 110vt plugs on em. And while they were at it...they also stuck in something that I dont recognize. Sorta kinda like a grinder thingy. Name plate says Harig Tool Cutter Grinder. WTF? Whats a Harig? And they put all these plastic wrapped thingies...Indexer? In there with it. There is some sort of accessory thing with an air connection sticking out of the middle of it..and something with a motor and belts. The stuff is all oily and shiney inside the plastic. Something must have leaked. I suspect that you bought all this stuff yourself. But then, that would make you a fairy, right? Dan |
That damned Tool Farie stikes again
On Fri, 14 Sep 2007 04:54:48 -0400, Wes wrote:
Gunner wrote: Nah, a bit south of the trout capitol of the world. Wes http://www.google.com/search?q=trout...ient=firefox-a lol Gunner Don't tell those people just up the road. They think they are the Trout Capitol. You have to have seen their famous fish with the 10,000.00 paint job. http://wess.freeshell.org/usenet/rec...king/trout.jpg When were you last in Michigan? Wes Dad retired in...humm...98 or 99, flew back for his retirement party. Gunner |
That damned Tool Farie stikes again
On Fri, 14 Sep 2007 02:50:07 -0700, "Tom Gardner"
wrote: "Pete C." wrote in message ... Tom Gardner wrote: "Wes" wrote in message ... Gunner wrote: Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? I don't want to get your hopes up. That was a tongue-in-cheek response. Grayling, Mi is whopping 32 miles from me. If the company ever sends me for training in California, I'll drop you a line. Wes Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. Sounds like fun. You could pick me up on your way past TX. GREAT IDEA!!! Let's ALL go to Gunner's for a few weeks! Throw another shrimp on the barby. Ill just have to butcher another beef. Who wants to run the chainsaw? Works great for quartering up a cow. Rubber suits are for sissies. But with you guys..Ill have to draw straws to see who gets to head shoot it...or lay out in the pasture with the 4570 and do it the indian way. Gunner |
That damned Tool Farie stikes again
|
That damned Tool Farie stikes again
On Fri, 14 Sep 2007 02:50:07 -0700, with neither quill nor qualm, "Tom
Gardner" quickly quoth: GREAT IDEA!!! Let's ALL go to Gunner's for a few weeks! Throw another shrimp on the barby. Barbeques are unnecessary in Taft in the summer. Just toss the meat on the top of your vehicle trunk or hood. It'll cook in no time. --LJ, who's been to GunnerWorld(tm) and lived to tell about it. -- If you turn the United States on its side, everything loose will fall to California. --Frank Lloyd Wright |
That damned Tool Farie stikes again
Gunner wrote:
On Fri, 14 Sep 2007 02:50:07 -0700, "Tom Gardner" wrote: "Pete C." wrote in message ... Tom Gardner wrote: "Wes" wrote in message ... Gunner wrote: Michigan? Hummm...I have a 1961 Indian motorcycle sitting in my Dads garage in Grayling, that Id really like have sitting in my shop here in California. Its possible I could get it down to the Troy/Detroit area... Perhaps we can help each other out? I don't want to get your hopes up. That was a tongue-in-cheek response. Grayling, Mi is whopping 32 miles from me. If the company ever sends me for training in California, I'll drop you a line. Wes Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. Sounds like fun. You could pick me up on your way past TX. GREAT IDEA!!! Let's ALL go to Gunner's for a few weeks! Throw another shrimp on the barby. Ill just have to butcher another beef. Who wants to run the chainsaw? Works great for quartering up a cow. Rubber suits are for sissies. But with you guys..Ill have to draw straws to see who gets to head shoot it...or lay out in the pasture with the 4570 and do it the indian way. Gunner You mean from the side of the road, with a million candlepower jacklight? Or there is a different way used down there? Cheers Trevor Jones |
That damned Tool Farie stikes again
In article rfDGi.64247$vP5.42727@edtnps90,
Trevor Jones wrote: You mean from the side of the road, with a million candlepower jacklight? Or there is a different way used down there? Cheers Trevor Jones No, darnit, that's for deer! Cows they just shoot whenever they need one. No closed season. |
That damned Tool Farie stikes again
On Fri, 14 Sep 2007 02:50:07 -0700, "Tom Gardner"
wrote: Since I'm only a few hours away, If you go to CA to visit Gunner, I'll go with you. We could drink all his Mountain Dew and play with his toys for a few days. I'd look forward to lessons in .45 calliber. I wonder how long it would take to be asked to leave. Sounds like fun. You could pick me up on your way past TX. GREAT IDEA!!! Let's ALL go to Gunner's for a few weeks! Throw another shrimp on the barby. Big enough group and Gunner won't have enough "stow away" pet stock to go around. Gerry :-)} London, Canada |
That damned Tool Farie stikes again
On Fri, 14 Sep 2007 13:04:58 -0700, Larry Jaques
wrote: On Fri, 14 Sep 2007 02:50:07 -0700, with neither quill nor qualm, "Tom Gardner" quickly quoth: GREAT IDEA!!! Let's ALL go to Gunner's for a few weeks! Throw another shrimp on the barby. Barbeques are unnecessary in Taft in the summer. Just toss the meat on the top of your vehicle trunk or hood. It'll cook in no time. --LJ, who's been to GunnerWorld(tm) and lived to tell about it. Got Google Earth up but can't identify Gunnerland - what are his coordinates? Gerry :-)} London, Canada |
That damned Tool Farie stikes again
Gerald Miller wrote:
On Fri, 14 Sep 2007 13:04:58 -0700, Larry Jaques wrote: On Fri, 14 Sep 2007 02:50:07 -0700, with neither quill nor qualm, "Tom Gardner" quickly quoth: GREAT IDEA!!! Let's ALL go to Gunner's for a few weeks! Throw another shrimp on the barby. Barbeques are unnecessary in Taft in the summer. Just toss the meat on the top of your vehicle trunk or hood. It'll cook in no time. --LJ, who's been to GunnerWorld(tm) and lived to tell about it. Got Google Earth up but can't identify Gunnerland - what are his coordinates? Just look for a yard with old lathes and milling machines. ;-) -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
That damned Tool Farie stikes again
|
| All times are GMT +1. The time now is 12:13 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter