Need a recirc fan for high heat
 

Anyone know where I can get an oven fan capable of recirculating 425 degree
max heat?
Part num would be greatly appreciated.
Thanks, Johnny

Need a recirc fan for high heat
 

"M D" wrote in message
. net...
Anyone know where I can get an oven fan capable of recirculating 425
degree max heat?
Part num would be greatly appreciated.
Thanks, Johnny


My mother designed a little chain-drive fan that pops into the rotisserie
drive in the back of her oven and turned it into a convection oven...and it
works well! The motor is outside the oven.

Need a recirc fan for high heat
 

I helped make a fairly large oven for curing composites. We started
with a blower wheel inside the oven and the motor outside. Had a
bearing inside the oven which we lubricated with Mobile One. But that
bearing failed a couple of time, so just deleted it and depended on the
motor bearings. This was a long time ago. I think we made a coupling
that incorporated a heat flow barrier.

Dan

Need a recirc fan for high heat
 

See http://www.ebmpapst.us/allpdfs/RRL120%5F140%2EPDF for one example.

--
Regards,
Carl Ijames carl.ijames at verizon.net

"M D" wrote in message
. net...
Anyone know where I can get an oven fan capable of recirculating 425
degree max heat?
Part num would be greatly appreciated.
Thanks, Johnny

Need a recirc fan for high heat
 

There are fans that run of thermoelectric produced energy made to sit
atop a woodstove that would probably be perfect for that, a bit spendy
however.
Google Ecofan

Need a recirc fan for high heat
 

Home Depot - Kitchen department. Run 425 all day.
Just buy the size you want.

Martin
Martin H. Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH & Endowment Member
NRA Second Amendment Task Force Charter Founder
IHMSA and NRA Metallic Silhouette maker & member
http://lufkinced.com/



M D wrote:
Anyone know where I can get an oven fan capable of recirculating 425 degree
max heat?
Part num would be greatly appreciated.
Thanks, Johnny



----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Need a recirc fan for high heat
 

When Thick film was popular - remember the early (late 60's) voltage regulators
on the alternators - auto - white molded - The thick film circuit was done in
Arlington Texas in the industrial district. Once the design was approved by Delco,
the small company put in a continuous feed - chain driven - 200' oven that had
zonal heat to ramp up - hold - ramp down - and exit. They had to have it simply
to keep up with production. Delco wanted more and more.

Those replaced the funky box of relays that was called a voltage regulator.

Martin

Martin H. Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH & Endowment Member
NRA Second Amendment Task Force Charter Founder
IHMSA and NRA Metallic Silhouette maker & member
http://lufkinced.com/



wrote:
I helped make a fairly large oven for curing composites. We started
with a blower wheel inside the oven and the motor outside. Had a
bearing inside the oven which we lubricated with Mobile One. But that
bearing failed a couple of time, so just deleted it and depended on the
motor bearings. This was a long time ago. I think we made a coupling
that incorporated a heat flow barrier.

Dan


----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----