 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Sheet metal brake help.
I'm in the middle of designing/building a small sheet metal brake. I
got everything figured out except 2 things/// 1. From the edge og the bas how far back should the clamp be to leave enough bend radius ? - maybe someone has a brake they can measure this difference on. 2. How much clearance is there between the bending edage and the piece being rotated to bend the metal ?? Thanks Mike |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sheet Metal Tool Layout/Storage | Metalworking | |||
| figuring Squares of sheet metal | Home Repair | |||
| bending sheet metal into a cylinder | Metalworking | |||
| sheet metal gas engine project | Metalworking | |||
| DIY Sheet metal brake. (how to make one) | Metalworking | |||
Threaded Mode
