Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
extruded aluminum project.... what to expect.
Hello,
I need some z-clips (flush mount hangers) in a continuous run. As seen here, but half the size: http://www.leevalley.com/hardware/pa...,41869&p=41869 Is it possible to have such things made of strong nylon? Or is aluminum the only economical choice. What should I expect for ballpark costs - as well as what a minimum quantity would be. (perhaps pointers to a good shop or two as well) I am in the prototype stage, but will require quite a bit of this. thanks... Tor |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
First Aluminum Anodizing attempts (long w/ pictures) | Metalworking | |||
Extruded Aluminum | Metalworking | |||
Aluminum wiring issue | Home Repair | |||
Aluminum wiring... | Metalworking | |||
Steel vs aluminum lightweight construction. | Metalworking |