Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
B&S #2 mill update
Go figure the damn thing is working now. I guess it just needed to run a
bit it's staying on all by it's self now and turning off when I want it to. I still have to figure out why the powerfeed won't engage on the X axis, the lever won't move to either direction position. Thanks to all who gave suggestions to me. -- Jack Fisher |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
B&S #2 mill update
wrote:
I still have to figure out why the powerfeed won't engage on the X axis, the lever won't move to either direction position. I had this with my Deckel FP1 (I know, completely different). The Z-axis didn't move. Could not engage it at all. Me quite puzzled! Then I found that someone has drilled a hole and hammered in a pin to prevent the accidential feed. 8-/ Nick -- Motor Modelle // Engine Models http://www.motor-manufaktur.de DIY-DRO // Eigenbau-Digitalanzeige http://www.yadro.de |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|