Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Grime Blaster
This item is listed in the Eastwood catalog as a sort of sprayer that
connects to 70 psi air and a hose to pressure wash stuff. I was wondering if anyone has used one or has any comments on its utility compared to a "real" pressure washer. -- Larry Bailey Illegitimi non carborundum |
#2
|
|||
|
|||
Grime Blaster
In article ,
"LBailey" wrote: This item is listed in the Eastwood catalog as a sort of sprayer that connects to 70 psi air and a hose to pressure wash stuff. I was wondering if anyone has used one or has any comments on its utility compared to a "real" pressure washer. I have one of this type (not Eastwood) but I don't have a 'real' pressure washer to compare it to. It works pretty good and blasts the thick mud and grease off my tractors. It does make a mess between the volume of water and the big piles of grease that come off. It probably would work even better with hot water, I'm working on that now. I paid about $30 for mine, I can't afford $$$$ for a 'real' high pressure washer. -- free men own guns - slaves don't www.geocities.com/CapitolHill/5357/ |
#3
|
|||
|
|||
Grime Blaster
On Mon, 01 Mar 2004 07:31:52 GMT, "LBailey"
wrote: This item is listed in the Eastwood catalog as a sort of sprayer that connects to 70 psi air and a hose to pressure wash stuff. I was wondering if anyone has used one or has any comments on its utility compared to a "real" pressure washer. Harbor Freight had one of these on sale when I was in one of their stores last week. Six dollars if my memory isn't faulty. Basically just an air spray wand with a side port, connected to a length of tygon tubing, whose other end in dropped in a bucket of hot, soapy water, or solvent. Look up Bernoulli if you want to know the principal. Basically, gas pressure is inversely related to velocity; moving air is below atmospheric, hence the fluid is drawn into the moving air stream. You won't likely get the volume of a true pressure washer, nor the ability to select different spray tips, but for small projects, it works just fine. The HF model did have a little needle valve assembly to regulate how much soapy water/solvent is pulled up. These things can chew through the air though. Take a normal air nozzle, hook if up to your line, pull the trigger, and see how long it takes to cycle. Might be too often on a small contractor type compressor, but a large, two-stage should be just fine. David Glos |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|