boiler finish
 

Hi All,
Several years ago I made a boiler out of a piece of 3/8" thick, 16" diameter
steel pipe. It is kept in a barn/machine shed where it is exposed to moisture
and temperature changes. It is rusting to the point that there is enough to
form a thin sheet on the surface. Oil based machine paint is of little use
because the temperature causes it to burn, peel, or otherwise fail. Does
anyone know of a surface treatment that can stand the heat and prevent rust? I
was thinking of automotive exhaust header paint, or perhaps the rust converter
paint, does anyone else have answers or ideas?
Thanks in advance,
Rick

boiler finish
 

Rhbuxton wrote:

Hi All,
Several years ago I made a boiler out of a piece of 3/8" thick, 16" diameter
steel pipe. It is kept in a barn/machine shed where it is exposed to moisture
and temperature changes. It is rusting to the point that there is enough to
form a thin sheet on the surface. Oil based machine paint is of little use
because the temperature causes it to burn, peel, or otherwise fail. Does
anyone know of a surface treatment that can stand the heat and prevent rust? I
was thinking of automotive exhaust header paint, or perhaps the rust converter
paint, does anyone else have answers or ideas?
Thanks in advance,
Rick

How about exhaust manifold paint?
...lew...

boiler finish
 

There are plenty of hi-temp finishes. Grill paint is good to almost red
heat.

Tim

--
"I have misplaced my pants." - Homer Simpson | Electronics,
- - - - - - - - - - - - - - - - - - - - - - --+ Metalcasting
and Games: http://webpages.charter.net/dawill/tmoranwms

"Rhbuxton" wrote in message
...
Hi All,
Several years ago I made a boiler out of a piece of 3/8" thick, 16"
diameter
steel pipe. It is kept in a barn/machine shed where it is exposed to
moisture
and temperature changes. It is rusting to the point that there is enough
to
form a thin sheet on the surface. Oil based machine paint is of little
use
because the temperature causes it to burn, peel, or otherwise fail. Does
anyone know of a surface treatment that can stand the heat and prevent
rust? I
was thinking of automotive exhaust header paint, or perhaps the rust
converter
paint, does anyone else have answers or ideas?
Thanks in advance,
Rick

boiler finish
 

Rhbuxton wrote:
Hi All,
Several years ago I made a boiler out of a piece of 3/8" thick, 16" diameter
steel pipe. It is kept in a barn/machine shed where it is exposed to moisture
and temperature changes. It is rusting to the point that there is enough to
form a thin sheet on the surface. Oil based machine paint is of little use
because the temperature causes it to burn, peel, or otherwise fail. Does
anyone know of a surface treatment that can stand the heat and prevent rust? I
was thinking of automotive exhaust header paint, or perhaps the rust converter
paint, does anyone else have answers or ideas?
Thanks in advance,
Rick
Old fashion black stove polish ? Its cheap and easily available
Ken Cutt

boiler finish
 

boiler finish
 

Hey Rick,

For just the surface rust, you might try Parkerizing. I have no idea
how it will take fire-box flame and heat though.

Take care.

Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXXX
On 26 Feb 2004 02:35:58 GMT, ANSPAM (Rhbuxton) wrote:

Hi All,
Several years ago I made a boiler out of a piece of 3/8" thick, 16" diameter
steel pipe. It is kept in a barn/machine shed where it is exposed to moisture
and temperature changes. It is rusting to the point that there is enough to
form a thin sheet on the surface. Oil based machine paint is of little use
because the temperature causes it to burn, peel, or otherwise fail. Does
anyone know of a surface treatment that can stand the heat and prevent rust? I
was thinking of automotive exhaust header paint, or perhaps the rust converter
paint, does anyone else have answers or ideas?
Thanks in advance,
Rick

boiler finish
 

Many thanks to all those who gave me advise on boiler finishes! Your help is
really appreciated.
Rick

boiler finish
 

On 26 Feb 2004 02:35:58 GMT, ANSPAM (Rhbuxton) wrote:

Hi All,
Several years ago I made a boiler out of a piece of 3/8" thick, 16" diameter
steel pipe. It is kept in a barn/machine shed where it is exposed to moisture
and temperature changes. It is rusting to the point that there is enough to
form a thin sheet on the surface. Oil based machine paint is of little use
because the temperature causes it to burn, peel, or otherwise fail. Does
anyone know of a surface treatment that can stand the heat and prevent rust? I
was thinking of automotive exhaust header paint, or perhaps the rust converter
paint, does anyone else have answers or ideas?
Thanks in advance,
Rick


How about lagging and cleading?


Mark Rand
RTFM