WTB TIG welder in Toronto area
 

Hello,

I need to weld some stainless steel so now I finally have the excuse and
funds to learn how to weld. I am looking for a brand recommendation for a
TIG welder in Toronto Area. Used if good quality would be fine. I know
that the motto is to get the biggest that one can afford and than some.
220V is available. I will be welding SS manifold out of 304 schedule 4
pipe. Here is a picture. The flange is slightly under 1/2" thick.

http://www3.sympatico.ca/borism/EXMAN/EXFLANGE1.jpg

Of course I will take the time to learn on something simpler.



Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs http://www3.sympatico.ca/borism/

WTB TIG welder in Toronto area
 

Boris Mohar wrote in message . ..
Hello,

I need to weld some stainless steel so now I finally have the excuse and
funds to learn how to weld. I am looking for a brand recommendation for a
TIG welder in Toronto Area. Used if good quality would be fine. I know
that the motto is to get the biggest that one can afford and than some.
220V is available. I will be welding SS manifold out of 304 schedule 4
pipe. Here is a picture. The flange is slightly under 1/2" thick.

http://www3.sympatico.ca/borism/EXMAN/EXFLANGE1.jpg

Of course I will take the time to learn on something simpler.


I believe Mike Graham, a regular on this forum a while ago does TIG.
He is up in Caledon somewhere. Anyone have his e-mail?

WTB TIG welder in Toronto area
 

On 13 Feb 2004 17:28:26 -0800, the renowned (Ed
Wrzosek) wrote:

Boris Mohar wrote in message . ..
Hello,

I need to weld some stainless steel so now I finally have the excuse and
funds to learn how to weld. I am looking for a brand recommendation for a
TIG welder in Toronto Area. Used if good quality would be fine. I know
that the motto is to get the biggest that one can afford and than some.
220V is available. I will be welding SS manifold out of 304 schedule 4
pipe. Here is a picture. The flange is slightly under 1/2" thick.

http://www3.sympatico.ca/borism/EXMAN/EXFLANGE1.jpg

Of course I will take the time to learn on something simpler.


I believe Mike Graham, a regular on this forum a while ago does TIG.
He is up in Caledon somewhere. Anyone have his e-mail?

His website (metalmangler.com) has gone away. There's another older
e-mail [ metal mangler at head waters dot com ] (no spaces) that you
could try.


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com

Where's Mike..was WTB TIG welder in Toronto area
 

Hey Speff,

I thought maybe you had kept in contact with Mike and the lovely Miss
Teree??. You did send photos the other day! VBG

Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXXX
On Sat, 14 Feb 2004 01:59:38 GMT, Spehro Pefhany Spehro Pefhany
wrote:

On 13 Feb 2004 17:28:26 -0800, the renowned (Ed
Wrzosek) wrote:

Boris Mohar wrote in message . ..
Hello,

I need to weld some stainless steel so now I finally have the excuse and
funds to learn how to weld. I am looking for a brand recommendation for a
TIG welder in Toronto Area. Used if good quality would be fine. I know
that the motto is to get the biggest that one can afford and than some.
220V is available. I will be welding SS manifold out of 304 schedule 4
pipe. Here is a picture. The flange is slightly under 1/2" thick.

http://www3.sympatico.ca/borism/EXMAN/EXFLANGE1.jpg

Of course I will take the time to learn on something simpler.


I believe Mike Graham, a regular on this forum a while ago does TIG.
He is up in Caledon somewhere. Anyone have his e-mail?

His website (metalmangler.com) has gone away. There's another older
e-mail [ metal mangler at head waters dot com ] (no spaces) that you
could try.


Best regards,
Spehro Pefhany

Where's Mike..was WTB TIG welder in Toronto area
 

Thought we all agreed to never mention that unfortunate situation again?

Jimbo
"Brian Lawson" wrote in message
...

Hey Speff,

I thought maybe you had kept in contact with Mike and the lovely Miss
Teree??. You did send photos the other day! VBG

Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXXX
On Sat, 14 Feb 2004 01:59:38 GMT, Spehro Pefhany Spehro Pefhany
wrote:

On 13 Feb 2004 17:28:26 -0800, the renowned (Ed
Wrzosek) wrote:

Boris Mohar wrote in message
. ..
Hello,

I need to weld some stainless steel so now I finally have the excuse
and
funds to learn how to weld. I am looking for a brand recommendation
for a
TIG welder in Toronto Area. Used if good quality would be fine. I
know
that the motto is to get the biggest that one can afford and than
some.
220V is available. I will be welding SS manifold out of 304 schedule
4
pipe. Here is a picture. The flange is slightly under 1/2" thick.

http://www3.sympatico.ca/borism/EXMAN/EXFLANGE1.jpg

Of course I will take the time to learn on something simpler.


I believe Mike Graham, a regular on this forum a while ago does TIG.
He is up in Caledon somewhere. Anyone have his e-mail?

His website (metalmangler.com) has gone away. There's another older
e-mail [ metal mangler at head waters dot com ] (no spaces) that you
could try.


Best regards,
Spehro Pefhany

WTB TIG welder in Toronto area
 

Spehro Pefhany Spehro Pefhany wrote in message . ..

I believe Mike Graham, a regular on this forum a while ago does TIG.
He is up in Caledon somewhere. Anyone have his e-mail?

His website (metalmangler.com) has gone away. There's another older
e-mail [ metal mangler at head waters dot com ] (no spaces) that you
could try.


That email is long gone.

His new one is

That is the one he gave me over a month ago when we were still
speaking to each other.

Now you all can email his hairy ass directly and stop blathering on
about him so I can read the welding/metalworking content posts in
peace for my upcoming welding classes.

Miss Jaime

WTB TIG welder in Toronto area
 

In article , Miss_Jaime says...

His new one is

Now you all can email his hairy ass directly ....

TMI! TMI!

Not listening, still not listening, LA LA LA LA LA
Still not listening!!!

Jim

==================================================
please reply to:
JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com
==================================================

Where's Mike..was WTB TIG welder in Toronto area
 

OK.

XXXXXXXXXXXXXXX
On Sat, 14 Feb 2004 12:51:51 -0500, "Jimbo" .
wrote:

Thought we all agreed to never mention that unfortunate situation again?

Jimbo
"Brian Lawson" wrote in message
.. .

Hey Speff,

I thought maybe you had kept in contact with Mike and the lovely Miss
Teree??. You did send photos the other day! VBG

Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXXX
On Sat, 14 Feb 2004 01:59:38 GMT, Spehro Pefhany Spehro Pefhany
wrote:

On 13 Feb 2004 17:28:26 -0800, the renowned (Ed
Wrzosek) wrote:

Boris Mohar wrote in message
...
Hello,

I need to weld some stainless steel so now I finally have the excuse
and
funds to learn how to weld. I am looking for a brand recommendation
for a
TIG welder in Toronto Area. Used if good quality would be fine. I
know
that the motto is to get the biggest that one can afford and than
some.
220V is available. I will be welding SS manifold out of 304 schedule
4
pipe. Here is a picture. The flange is slightly under 1/2" thick.

http://www3.sympatico.ca/borism/EXMAN/EXFLANGE1.jpg

Of course I will take the time to learn on something simpler.


I believe Mike Graham, a regular on this forum a while ago does TIG.
He is up in Caledon somewhere. Anyone have his e-mail?

His website (metalmangler.com) has gone away. There's another older
e-mail [ metal mangler at head waters dot com ] (no spaces) that you
could try.


Best regards,
Spehro Pefhany

WTB TIG welder in Toronto area
 

Hey Speff,

See!! That WAS her in the photo!!

Hey, say Hi to Mike if you do write.

Take care.

Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXX
On 14 Feb 2004 21:02:14 -0800, (Miss_Jaime)
wrote:

Spehro Pefhany Spehro Pefhany wrote in message . ..

I believe Mike Graham, a regular on this forum a while ago does TIG.
He is up in Caledon somewhere. Anyone have his e-mail?

His website (metalmangler.com) has gone away. There's another older
e-mail [ metal mangler at head waters dot com ] (no spaces) that you
could try.


That email is long gone.

His new one is

That is the one he gave me over a month ago when we were still
speaking to each other.

Now you all can email his hairy ass directly and stop blathering on
about him so I can read the welding/metalworking content posts in
peace for my upcoming welding classes.

Miss Jaime

WTB TIG welder in Toronto area
 

On Sun, 15 Feb 2004 19:53:57 -0500, Brian Lawson
wrote:

Hey Speff,

See!! That WAS her in the photo!!

Nope. Wrong colour hair. Mine is red not black.

WTB TIG welder in Toronto area
 

In article ,
says...
In article , Miss_Jaime says...

His new one is

Now you all can email his hairy ass directly ....

TMI! TMI!

Not listening, still not listening, LA LA LA LA LA
Still not listening!!!


I commissioned this drawing from my son some time ago, but
cooler heads prevailed, and I didn't use it. Seems
appropriate now...

http://www.suscom-maine.net/~nsimmons/news/LaLa.jpg

Ned Simmons