Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking,misc.fitness.weights
|
|||
|
|||
Handling 150 lbs devices
Buy a 12-pack and invite some younger backs over.
"Ignoramus23984" wrote in message .. . I am soon going to pick up six devices, each is a rectangular shape approximately 2x1.5x1 foot. Each weighs 150 lbs. I hope that the seller will load them into my pickup with a forklift, but unloading is where I have my doubts. I could unload them with a chain hoist or a "shop crane", but that is a hassle. I do generally deadlift 170 lbs, but I am a little afraid that unloading is a different kind of movement and is more injury prone. I am not really all that worried to damage the devices, each cost me around $6, but I do not want to get injured. So, I am looking for some simple unloading ideas that could make it a little safer. Such as, perhaps, to put a "step" close to the tailgate so that I could first lower the thing on that step, and only then to the dolly. Maybe I am just a wuss and unloading should be no problem, but I wanted to check with knowledgeable people. Any thoughts? i |
#2
Posted to rec.crafts.metalworking,misc.fitness.weights
|
|||
|
|||
Handling 150 lbs devices
Best idea yet!!!!
"Tom Gardner" wrote in message . com... Buy a 12-pack and invite some younger backs over. "Ignoramus23984" wrote in message .. . I am soon going to pick up six devices, each is a rectangular shape approximately 2x1.5x1 foot. Each weighs 150 lbs. I hope that the seller will load them into my pickup with a forklift, but unloading is where I have my doubts. I could unload them with a chain hoist or a "shop crane", but that is a hassle. I do generally deadlift 170 lbs, but I am a little afraid that unloading is a different kind of movement and is more injury prone. I am not really all that worried to damage the devices, each cost me around $6, but I do not want to get injured. So, I am looking for some simple unloading ideas that could make it a little safer. Such as, perhaps, to put a "step" close to the tailgate so that I could first lower the thing on that step, and only then to the dolly. Maybe I am just a wuss and unloading should be no problem, but I wanted to check with knowledgeable people. Any thoughts? i |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Handling 150 lbs devices | Metalworking | |||
SELL this FBI NOC LIST and MAKE MILLIONS like TOM CRUISE did in MISSION IMPOSSIBLE | Woodworking | |||
FBI SADISM, PERVERSION, MENTAL TORTURE and BLATANT human rights violations | Woodworking | |||
Too many devices on telephone line | Home Repair |